Search results

Just been fitting my oil cooler and now my hands are horribly blistered from "push fit hose" It's all 1/2bsp stuff. I've got it on this far, run it an it's not leaking anywhere. I'm just a little apprehensive about long term reliability (going to Germany in the summer) I used a hair dryer to...

As it says, anyone who has an oil cooler could be of great help. Do you know how long the pipes are which go from the sandwich plate to the cooler. I imagine there are a few different set ups but I don't want to be being some premade pipes that are too short :) Thanks gray

Yes I'll have to bridge the wires to check. Which wire coming out of the ECU am I looking for? I wouldn't be bothered about the speed showing as it never used to on my old mk4 golf!

Looking to pop this in the dci. It doesn't have the trip computer (mpg, miles until full etc) so unsure if it will work out. Has anyone fitted this to a clio dci with expression spec?

Also would be illegal as the wrong colour light is given off

Also wanted to add. This isn't actually a recall. It's a safety check as they will be charging for the work if it needs doing.

otherwise "Sevenoaks Accident repair" in lockyers yard, dunton green. Always good work and cheap

Just got the letters for the clios. I'm not interested in taking the 182 in as it's always been greased. I am interested in taking the DCI in though as it's new. What I'm really asking is, will they give me one of those check lists that tells me everything else is wrong to save me the hassle of...

There is absolutely no info on this all over google and all renault forums!!! Even the dealers told me the wrong location for the switch haa

Just to finalise this thread. As there was no knocking and the car ran fine I was confident the sensor may be busted even though the fault codes showed nothing I replaced the sensor today which is on the front of the engine, neither of the TWO near the filter. It's the sensor just behind the...

Call me a risk taker but we've just driven 30 miles with the light on all the way. Nothing sounds wrong so I assume the pressure is okay and we would have blown up if it wasn't. Sensor?

Just check the coolant and there are no oily marks of blobs Brake fluid level is the same as in my 182 so shouldn't yield any problems. it's around the top of the white lip, pic doesn't show to much. We drove it yesterday and it kept coming on and off as you described, didn't seem to be a...

Yesterday we bought a clio dci 65 2002. It's in really good condition and runs very sweetly. When we were driving home after about half an hour the oil pressure light came on, along with the mandatory STOP light. Nothing seemed a miss and it went out before I got the chance to pull over. I...

I do have a broken arch liner :o Certainly worth a check-a-roo as I'd been driving in the snow yesterday. Doesn't seem to have happened today though.

I thought it might be the ballast but very unsure. I saw it on an audi recently, behind me, one light went off and then both, then both came back on when he realised and the same happened again and again!

Only noticed this evening. My n/s xenon keeps cutting out. When I turn them off and back on again it comes back on and then shortly goes out again. It's also a slightly different colour (blueereer) than the o/s. Both bulbs were changed for genuine phillips items in December so there are no...

Should be getting mine tomorrow hopefully. Previously tried an apexi on the clio before I bought it. Currently running a k-tec style with a K&N on as below. Was a beast in the top end with fake on due to the design of the top cone. Going to run 70mm straight off the forge elbow. Anyone else...

confirmed they are superflex 2092 bushes

well won't you look at that. I'll have those! Thanks chaps

Having taken off my rear arb recently for a little touch up it needs a little more than that. Bolts seized on and all that stuff. I'm wondering if anyone knows where I can get those purple bushes and also a black thread cover like you can see between the bolts. They seem incredibly universal...

Reviving an old thread. Do you remember what size of grade of bolt you used to push it outside of the bumper? Looking to do mine the same.

https://www.tdi-plc.com/index.php?pge=c_chassis_dyno_hire thats the real deal

Took my metal gauze out yesterday and it's a completely different piece of kit. It dribbled out before and wasn't that think. Now it comes out like I always wanted it to and blasts out.

Mine does this rarely, think its the pas but doesn't bother me

String the car so you can see yourself whats happening to the sus, best way to get it bang on

No that wasn't a joke there was some crazy replica racer driving

Times are hard!!! I'm looking to buy them piece by piece, I know Renault can be expensive even for the littlest bits

Didn't have spacers so wheels were well into the body, also noticed some false advertisement on the bullets. Slow down a little!!!

Come on please, I beg you

WP_000358 by grazo22, on Flickr