Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Mine is the same and i drove through just the worst thunder storm ever last night! The roads were so flooded that i couldnt even see the white lines so i was a bit concerned driving through about 2-3 inches of water that it might go up the pipe but everything seems fine
Yeah my best time at York yesterday was a 15.2, Didnt realise how totally shagged my clutch is til I took Jons down the strip
Thinking maybe the lack of bite i have on my clutch is giving me pretty poor starts as i found the take off in Jons alot easier, so maybe a new clutch will have to go...
King stromba, is right its exactly the same as ive done dont bother knocking out the black plastic plates it will only make the bumper look a mess and youl never get the bloody things back on again just take out the passenger side head light and fit a scoop in its place , now the black plastic...
Best mods for a williams to start with are
S/S exhaust
decat
chip
and a performance panal filter for ya airbox
DONT UNDER ANY CIRCUMSTACES USE AN INDUCTION KIT
Motorworld, can do the A539s quite cheap
special offer is the 205/40vr17 at £64.99
my tyre size which is 185/55vr15 are £90.00 (quite expensive)
so might change my front tyres to 195/50vr15 £44.00 (Bargin :) )
Yeah was a great day out at york today
Best time of the day was 15.21 @ 92.1mph (very pleased)
Hopefully next time with a bit more practise and get the car properly stripped out i can maybe creep into the 14s
Many thanks to Jon for fitting me the chip, top job fella!! The car now pulls...
Mate go to this website
http://www.raldes.co.ukwww.raldes.co.uk
For your car bigger discs would be a total waste of money other than they would look mint behind your new alloys
as you only have a 1.2 just a pair of uprated disks and pads for the front would be fine
go to the obove...
I was gunna go for the big brake kit for mine but they wont fit behind standard williams alloys and i too would probably need 8mm spacers, think you can pick these up quite cheap from most motor accesories stores, unfortunately you would then need much longer wheel bolts, not sure where you...
No it costs 9.50 to get in, ie, spectate (which is a rip off)
it then cost 15 quid to run up the strip as many goes as you like (which is very cheap compared to the pod)