Search results

Right, my brothers thinking of taking his VTS off the road for a year, as he has use of another car to clock up the miles on, and with the money hes spent on the Saxo, its not worth selling it. So, how is the best way to keep a car off the road for a year? Should it just be left, or taken...

I had them send it straight to HillPower where my car is, but Ive just got of the phone to Nick who says there is no cold air feed with it. Any ideas before I phone them... Surely its included in the kit, my brothers one for his cossie was!

Can anyone help me as to what wires go where..... My brother had to disconnect all the wires of his amp for some reason, and when hes come to put them back, were not sure what goes where.... Firstly the easy ones; Speaker wire, each side has one white wire and one white and black wire...

My brother is after an exhaust for his cossie to rival my K-Tec system... Anyone know which is the best? I know its not a clio question, but someone might have a good idea. I think there are two cats on them (small turbo model), so he wants a straight through system. Anything thats good...

.....for a week. Picking it up next weekend, hopefully with quite a few more horses under the bonnet! :devilish: Anyone going HillPower next week anytime, be sure to check out how my cars looking for me!

Ive just gone to tighten up my wheel bolts after Ive had my new alloys fitted a bit ago, just to find my wheel brace is too big for the bolts.... Whats going on?

Anyone got a Momo Handbrake Handle on their valver....or other Mk1 Clio? I tried fitting mine today, but everytime I tightened the screws up, the button would get stuck in the end, and wouldnt release or lock the handbrake properly. It just seems a couple of mm too big...... Anyone got any...

My water temp gauge stopped working last week, with the needle just sitting slightly above bottom. Ive been told I need a new Gauge by a mate whos an auto electrian. After looking on http://www.gsfcarparts.comwww.gsfcarparts.com & http://www.eurocarparts.comwww.eurocarparts.com with no luck...

Right, my cars going in to Nick at HillPower early January and I need to get hold of a fully sealed Induction Kit before then. Im probably going to get a Piper X Viper, unless someone can suggest anything better...... What is the inlet size for the Viper? Nick is gonna make the adapter for...

Ive been told the gauge is at fault, and need a new one. Been on http://www.gsfcarparts.comwww.gsfcarparts.com but not quite sure what Im ordering...... Anyone care to help me out? Thanks Tom

Just tried phoning Nick and it says the number is unavailable....... Dont supose anyone has been in touch with him today? Ive emailed him and pmd about some work on the valver, just need to speak to him to book my car in as soon as poss! Tom

Anyone got them? After I got my valver lowered and then the 16"s put on, it was put on Demon Tweeks 4 wheel alignment system. They said theyve sorted everything bar the front camber which is about a degree out. Are they simple to fit? Thanks Tom

Im after a fully sealed IK like the Viper. I need a full kit i.e adapter included, as I dont know anyone who can make me an adapter. What are my options oh wise ones.......... Cheers Tom

Demon Tweeks have just phoned me to let me know my alloys will be in tomorrow. Wont have chance to get to Wrexham til Friday though.......cant wait! 16" Momo Fighters with 195/45 Goodyear GSD3s. Got some bolt in alloy valves and locking wheel nuts thrown in for pretty much nothing too...

Just phoned Xtreme about buying a steering wheel (pg 78 in this months Max Power if you want a look) and they said they dont accept credit/debit cards. So they gave me the address and Im suppose to send a cheque there for £124 (£102 for the wheel and £22 for the hub - not bad I thought)...

Any one got any pics? Wanna see what they look like on in the dark......

The vents on top of the dash, that blow onto the windscreen dont seem to be working...... Everything else works fine, fan, heater, every other vent...... Any ideas? Tom

My cars still not running quite right, so Im gonna buy these bits and see what happens. Dont need any new plugs cos they went in on the last service. How hard are they to fit myself (me being really not that clever!) Ive done leads before, a dizzy cap doesnt look too hard. What about the...

Anyone seen/got one of these? Just seen a red/black one in Fresh Stuff in Max Power (Dont start, :p) Opinions.......

....for the first time today since Ive bought it (14months ago) My power peaks @ 6650 rpm, so only ever really go upto that or a bit above. Wasnt even racing, was just holding it in 3rd, at about 50, before I had chance to overtake this car. Wasnt even full throttle, just hit it as I was...

I quite fancy some dtm mirrors on my valver, dont really like the m3, single stalk or merc style ones. Any others that Ive missed? Also, what happens to the external temp gauge, will it still work with new mirrors?

Is it possible to colour code it, or cant you spray it? Would it just be easier to take it off?

What dya reckon? http://www.quadconversions.com/renault_clio_afterburner.htmhttp://www.quadconversions.com/renault_clio_afterburner.htm

Im after a new steering wheel for my valver. Want something a tiny bit smaller (not too small) in black and red, but cant find any ones I like. Only looked through the tweeks catalogue though. Any ideas?

After finally getting the running sorted out on my valver (see below thread) http://forum.cliosport.net/display_topic_threads.asp?ForumID=6&TopicID=54240&PagePosition=1&ThreadPage=1http://forum.cliosport.net/display_topic_threads.asp?ForumID=6&TopicID=54240&PagePosition=1&ThreadPage=1 I took...

I know loads of you have of this problem too and as of now, I dont think anyone has found the answer......until now! My car recently went in to get a new ISCV as the old one was knackered, and this helped the running a bit, but didnt solve it. So I decided to leave it at the garage all week...

This morning on my way to work, just put the wipers on, and they went up about 3 inches and then stopped! Thought it might have been the motor, but disconnected the plug, and the wipers could be pushed back down to the normal park postition. Was working fine the other day - Any ideas on...

Anyone insured with them. Just got insured with them today, they beat everyone by well over a 100 quid! If anyones insurance is up for renewal I suggest giving them a ring and ask for Phil - 01279 719932 My brother saved over £300 on his ECos with them too! Tom

My brothers g/f has a K reg 1.4RT, and Im selling my valver alloys to him next week. Theyve got 195/50 tyres on. He wants to lower it, but by how much? Just looked on K-Tecs site and they do -35mm and a -55mm springs. Lower the better really, but will the -55mm springs give loads of...

I need to sort out my insurance today for next week when it runs out. Anyone suggest some online sites and some good cheap companies. I will be 20, 2yrs NCB, Pass Plus (dont know if that will still count), low crime location. Car is 95M 16v, with Clifford Concept 300, TPTF. What are other...