Search results

All depends on how far you want to go and the budget? I spent a few hours messing in Photoshop, different ideas and things. The car was red, so kept the most complex parts that colour (bumpers, sideskirts, etc). Then took it to a local company we've known for years and a few days later it was...

From what I remember, the fuel level was straight to the clocks rather than via CAN. Its just a simple variable resistor, which is linear. First find which wire it is (test resistance with multi meter and move the float up and down). Wire it up in a simple voltage divider circuit, with a 1k...

So quite a bit has changed since the last update (and Photobucket changes)... I used it a lot in 2017. Built and fitted a Kaaz LSD with a 3.64, all good. Removed the servo and went to twin master cylinders for braking, much better. Had a few really good days out in it at Cadwell in July...

For an 'easy' all in one solution, id be looking for a second hand DL1 or similar, from what I remember the Emeralds output data over a serial line which they can log to memory card. Other than that, its something custom probably to read that serial data the ECU outputs

Standard ECU? Standalone? What data do you want to log? I use a Dash2Pro...

Achieved a tad over 30mpg too 😂

I'm still around :up:

Snetterton went well, clear weather bar a light shower towards the end of the day. Unfortunately it highlighted a few issues with the brakes which I have been dealing with since last summer - still not happy with them so changes are planned in that respect also. Couple of the more...

So the paddle clutch went in, then headed up to Croft. Having never been before, I was surprised how good the circuit actually was, would definitely go back. Not actually got round to sorting a proper video yet but here is a bit of a clip.. I was running close to the noise meters at Croft...

Snetterton last year highlighted too much body roll after moving to 17s, so that needed resolving. Bit of an external video from there first though: Between then and Christmas I changed the springs to 10kg all round (from 7kg F/8kg R). This meant readjusting all the coilovers to suit. I...

Both wings are off at the moment as they are being replaced... other changes include matching silver bumpers (rather than black) and silver skirts etc.

So the original TPS on the Jenveys started to play up at the end of last year. Swapped to a different type, made a few other changes and got it back on the dyno to re-set everything up. Il do a proper update some time, as there have been a few other changes... but heres some noise:

Yes and power was still rising @ 7200rpm+. 2.5" was plenty.

Nope, I modified the manifold and ran the crank case breather/vent system. If you go back a while in this thread you will find details on it. The catch can just kept filling up every so often otherwise (venting to atmosphere)

...the normal quick laps make boring viewing :smile:

Its been a fun year.

Managed to source two sets of 17x9 Team Dynamics ProRace 1.2s. One set ET23, one set ET40. With my setup this is perfect as I can mix the two sets, running ET23 on the front to clear the brakes/suspension without having to use a spacer... and ET40 on the back so I don't need to pull the wheel...

@Jamie86 Couldn't make that date, so we're on the weekend before, Saturday 3rd. Few of us there DC2/Clio200s/etc

@JB21 it was... see above :) (Can't post in that other thread!)

Was at Oulton on Wednesday... more of the same! Snetterton in a few weeks. Moving to 17x9 and wide full wets from now on for the damp days, more updates on that soon!

Leave it with me for a couple of days and I should at least have some drawings. I still have the set sat here on the desk if you're interested in them. With the next outing Silverstone I gave the car a quick once over after Spa. The N/S diff output seal was weeping slightly, so pulled it apart...

Outside from the top of Eau Rouge... Rare NSX sighting actually going well on track...

I've left the 320i badge on the boot.... had someone come up to me in the morning asking how a 320 had just gone past his 328!

So put nearly 200+ hours into re-shelling the car, practically every night after work, some long weekends... just to get it finished in time for Spa. I ended up having to get the alignment done on the Saturday morning we were leaving, and drive straight to Dover. Onto the ferry and a steady...

On the new engine I keep VANOS engaged until 5800rpm but it may be different for your build...

Yeah he said he was having it, asked could he borrow my engine crane but never heard anything since, assuming he got sorted lol

I will send you a PM shortly James

So the rotten shell went at the weekend... Made a lot of progress on the new shell. It was a complete car, so both front and rear subframes/running gear were scrapped, along with the engine and interior. I've already got it sat on my running gear, suspension, and the rest of it. Replaced the...