Search results

Get the old ICV assembly wrapped in a rag in a vice, and use a hammer and centre punch to gently knock the pins out. Use a couple of nuts/bolts to reattach new one. Make sure O ring is firmly seated whilst coupling.

Anyone? :)

Hooked up rstuner to confirm the error is with the speedo sensor. Have tried over and over getting the sensor in but still no joy. Any ideas people's

Charlie Red aerosol

Banged some shiny new rear discs and pads on Buttered

Appears cineworld is the place to be

Welcome from the CS pauper team

Silver 172 in cheirton could be me. One of my bros lives there. Ph1 here, sure I drove past one the other week whilst trying to find a parking spot

Haven't just yet but I've got a rstuner coming early in the week so will report back

Headlight correction. Done the wife's car too cos I'm good like that + possible bum fun may result. Inb4 silver visions on the non sport

I've got all of those. I can't lose!

Cheers Dan. Ill give that a crack tomorrow and report back. Any particular lube?

It's pushes in fairly easily in two stages can't get it any further past the second one

I've fitted it with the two keyways closest to the front of car (to match the slots in the recess) assuming that's correct?

Clocks are fine (nice trick that) Must be sensor then. New one is fitted but on closer inspection I can see the top of the top blue o ring in the casing. I've pushed down as hard as I can and tried giving it a few love taps with a 21mm socket but no joy. Is there a knack to get this fully...

Cool cheers ill take a look in a bit

Hello there, My o/s rear damper is shot and n/s is starting to weep :( Currently rolling adjustable Koni Yellows with 40mm lowzzz y0 Is it worth just straight replacing, or can you recommend an alternative setup? ​Thanks yeah

Anyone?

TN25 represent

Removed oil separator, cleaned up mating faces and resealed with genuine Renault smurf blood sealant. Fresh Fuchs oil and NFJ Gearbox oil going in tomorrow. Pleasant

That's fully home, wouldn't be behind the dash itself?

Anyone got any ideas on this? :)

Just had another look, seem to be in ok, I can feel it go in over both o rings but it doesnt make a really good connecting sound like I'd hope. Pulls out fairly easy too? I've put my body weight on it pushing down but doesn't seem to want to go anymore. The little latches both sides of the part...

I'm going to take another look soon, just waiting for the manifold to cool down a bit I was on motorway and it just dropped and stayed there. For a few days after it would randomly wiggle between home and 20mph, but hasn't done anything for a while now

Speedo isn't doing anything. No warning lights, car stops on a dime. Sometimes after a spirited drive and a hard brake the pedal 'farts' a tiny bit

I've managed to swop it with new one but hasn't made a difference. What else could cause the speedo to stop working? Hoping its not the loom

Read up on some other threads this just pulls out. Been giving it a good tug but no joy. Didn't want to pull any harder without checking I'm doing the right thing here. How hard do you tug yours??

Found the problem yo. Tracked noise to the alternator vibrating against the acc below it (pas/ac) can't remember which one. I have changed the aux belt etc..in the last few months so set about making sure everything was right. Busted out the jubilee clip and tensioned up the tensioner to release...

Oh that sucks balls. Can only hope it's minor. Ill try at get it diagnosed tomorrow at ashford Motorsport. It only really makes any noise on idle just above 5 on rev counter. Driving in any situation it's fine. Really sounds like something is loose somewhere and rattling as the idle is very...

Oh diddums :( Ill get a better vid tmrw. That one makes it sound worse then it is IRL