Search results

Get aftermarket, probably a lot cheaper!

I am pretty certain as mentioned above that there has to be a speed camera sign within one mile of any camera or mobile device, Really hope you hammer them, I got stopped the other week, 86mph in a 70 on dorchester bypass, Think he mainly saw me cos of my last minute squeeze past another clio...

Depends how you define fitted?! If there is no bottle of gas then arguably there is no nitrous system. Thats the approach I would use, If there is no gas bottle there then there is no nitrous in the car, I should not think that would be too much of a problem. For advice I would advise...

My installation was top notch and I have utmost faithk, I have only had two issues, first was the bonnet sensor, the plastic standard one was sh*te so they replaced it with a decent metal one, and the ongoing problem as detailed above. If its happened on two different cars at least from two...

Sorry for wrong link, couldnt remember whether it needed the l and I had spaced and then gone back so didnt work cheers rob! get it done pro would never try doing that stuff myself not my strong point! You dont get the handles off you get it sprayed on the car! Cheers mate. Any more...

Thank god Im not alone!!! going to pm you as well but I have exactly the same problem with my concept 300. You have to deal with Gap Im afraid, got mine fitted where I was living in Hatfield, now over 200 miles away and the uk distributors of clifford wont allow other dealers to honour the...

http://www.adrenalinone.co.uk/clio.htmwww.adrenalinone.co.uk/clio.html Obviously my car is silver and I guess thats probably when it looks best but I would be interested to see it on a contrasting colour like black or red or something, I think it will look wicked no matter what. added to...

God I love the Mk2,mmmmmm

Come on ROb, pics?? and an audio clip?

My clio had 7 miles on it, As stated above I would not want more than 10 or 15 maximum, that gives them plenty for factory testing and on and off transporter driving!

Right will try answer questions. Colour coding about £250 but it was done at same time as other work so total was £450, place I went to would colour code for £250. Loowered it 60mm on standard alloys the pics you see on my site with the old alloys are lowered 60mm. then I put the 17s on...

Yes I think they were all on the car while it was sprayed, WIll try and call my bodyshop and find out.

-60mm 17s, and I have only ever once hit the bump stops noticeably, obviously it takes care on speed bumps, and yes it may wear them out over time, but the point of the spring is to take much of the load, a shortened spring will still take load, Personally I am happy with it, If the worst...

ok cheers guys, Have kept the original springs and wheels, Will keep exhaust and air box etc when I change those, Will mean a bit of money when it comes to selling fitting original springs etc but hopefully I will be able to sell all the parts on again. Thanks again

When it comes ot the day of selling or trading in my clio. Whats the deal with trading in modified cars? Will I get more money if it has aftermarket alloys, lowered, colour coded etc?~ Or am I better to hang on to all the various bits and pieces and restore to normal and sell the parts...

Jim172cup: You let your mates drive your cup???!!! Can I be yuor mate please!!! You are so generous, I would never let my mates drive even my 1.2, (I know how they drive!!!)

What made them bend in the first place? Just jacking them up?

Ref: The viper, I have been told they make the smallest increase or difference in noise of any induction kit because they are completely sealed? Anyone heard one can fill me in?

Just seen these listed under one of the gallery cars. Anyone know how much they are and if they make much of an improvement? Thanks

Appreciate the reply tho! I know someone has done it for a 206 and it was made for them, quite cheaply but I dont have contact with him anymore, I know what you mean about the security issue, Just thought it might have been a cheap way to go!! Anyone want to give me a Kenwood M700?

What you think the mk3 looks more girly than the mk2?!!! hehehehe hohohoho hahahahah LMAO :D I like both clios BUT I cannot see how you can say the mk3 is more girly, from the front which is the major difference in my mind its far more aggressive, No disrespect intended to any persons alive...

The side strips remove very easily, I did it by accident a few times when cleaning my clio, When I had them colour coded they made them a bit more secure as they were vibrating with the bass!! Dont think the front and rear bumper inserts are removable. Anyone back me up on this, Would be very...

Apparently from what I have been told in the last few days, the pipercross is the best bet, Coupled with the relocation kit from Ktec, All induction kits will make the engine run slightly lean, not necessarily (so I am told a bad thing, ) best bet get a nice exhaust to compensate. Im doing the...

Just seen the clio in Revs owned by Jamie with the cliosport stickers in the back! Looks wicked, Questions i where can I get a pod for the screen to go by the display in the middle of the car made, and how mcuh would it cost, looks neat and is possibly a good way of getting a good looking...

Mine dont beep best bet is probably wear the seat belt!! Funniest thing I have heard for a long time. "Woman walks into the clothes shop/boutique type place my girlfriend works in, chats away, says "oh its so hot, so horrible driving, and i couldnt possibly wear my seatbelt because it would...

Ktec: twin 3.5" £230 then I assume postage plus fitting costs (anyone know how mcuh an average garage would charge fitting?) Powerflow dealer near me: nsame package £240 fitted, IOpinions on which ios going to be the better exhaust. Powerflow say they can do me a custom decat for an extra...

stealth shelves advertised in magazines, Made by Auto Acoustics based near Weybridge, Surrey, £90 and worth every single penny, If you of the mind set then you can make it, but I could not be arsed and ordered one, and a nice perspex grille for my sub too.

If you worried about changing the speakers or taking trim apart and running wires etc then get it done professionally, I can do most wiring jobs but its the taking trim off I refuse to do so I prefer to hand over to someone who will pay if he c***s it up!! Speak to a couple of local...

Hmmm I have just been advised to go Custom route, Would a custom from powerflow be a custom or is it universal components made to fit as stated above? Also recommended a decat, what probs does this cause with future MOTS etc.. Going to go for a pipercross induction kit with relocation...

Hmm cheers Rob and Tom, Just spoke to Ktec, guy was not that helpful kinda telling me it was not really worth induction kit on a 1.2 cos noise and power gains will be minimal, now I accpet power gains are small, but when you start with only 75bhp then anything is a bonus, Can we get decent...