Search results

I'm after the above ? Who sells these ? I think k-tec do one ? Anywhere else or any trader on here make them ? Also where can i get a new Lamda Sensor from ? Is it worth changing one as the other is just for monitoring ? cheers Finch

Cool . Just hard trying to get under the car I axle stands so may leave that until I get it on some 4 post ramps

Ahh ok . I will need to check my loom position as it seems to be not long enough ! Ive vey had the engine out for a while now and just finishing off and that seems to be alittle short as it just about reaches. i will have to see why this is would the the car start without this connected ...

Im just in the middle of connecting up my wiring loom and i am struggling to connect up the the sensor on the bottom side of the gearbox. seems pretty tight on length ??? not sure if there is a particular route of the loom and is it tight on length ?

Nothink done this week yet ! Just need to sort out how the loom sits on the gearbox as i have no idea how it sits and think some of the plastic loom casing is broke !

Anyone got any pictures of the wiring loom in place over the gearbox so I can see how it goes ? ​mines in a tangled mess at. Moment !

I'M just after a pipe without a cat > cats are for pussies :-0

Anyone tell me the way the loom should sit and what does the palstic piece bolt too ?

Anybody got any pics of which way the wiring looms runs and bolts where the upper gearbox mount bracket is and ecu connector . ive got all this side of the loom and can't remember which way the loom sits as there some plastic on the loom which must screw into somethink and not sure if the loom...

Do you sell one Fred ? X

It will be one of 3 , ballast , ignitor or new bulb

Let me know what you need and I will try find where I got mine from. There hella products . Ballast cost about £85 new , that's the grey box underneath and the ignitor was £40 the black box behind the bulb . or get 2nd hand of people but it will wear out as thy have limited life

Same here Buddy , i keep getting grief for spending my free time on the cars ! Ive had to recover from a serious road accident which happened at xmas which left me not being able to walk for 3 months ! Ive since then stripped my 200sx and re-built one from just a shell and got running and MOTD...

The Xenon has a ballast pack which sits underneath the headlamp and bolts to the headlamp and an ignitor on the back of the lamp. Does the otherside work buddy ? If so swap the ballast from that and then ignitor then lamp , do this 1 by 1 then you will know which part has failed. These do have...

Get a carbon BMW badge buddy

The exhaust cost me £150 Brand new of a forum member, otherwise i would have bought a yozza sport one.

Cool i will look for getting a second hand one then see what maps they have . I know they do a 98 ron and a pops and bang one i think ?

My clio 172 track car is running a 182 manifold and de-cat . Is it worth getting this mapped or getting a RS tuner ? Do they actually do anythink and improve performance ? Im just looking to squeeze abit more power without spending alot of money cheers Finch

I have fitted my clio 182 Manifold to my clio 172 , I have a scorpion system. I havent had a look underneath as of yet to see what i need to finish it off. Im assuming i need a custom de-cat pipe making up unless the 182 de-cat pipe will fit ? What have people done ? cheers Finch

No real colour scheme. The pink was just some paint i had left and was bored :-) Its only a track car so i dont even know why ive bothered powder coating. Hows the turbo ? Gutted i had to give up on the turbo engine after the crash :-( , probably for the best , got one turbo monster as it is !

​

Forge silicone hose kit fitted up my other project which has taken all of my time up ! Nissan 200sx turbo , Garrett GTX2867 turbo , it makes 380 bhp at actuator which is 1.2 bar and the turbo is capable of 2.2 bar :-) ​

Abit of colour Inlet manifold and expansion tank ans PAS now re-installed , brand new renault pas pump , brand new Renault water pump , new Renault cambelt kit and de-phaser pulley and pure Motorsport air con delete kit .

Driveshaft bearing support Front hubs had abit of paint

Sounds good buddy , I went for a Bosch too

Anybody know what the recommended Crank current is for the 172 and dimensions ? Anybody recommend where to purchase online ? I want to order one this afternoon cheers Mike

Abit of painting for now until i can get them powdercaoated agian ! Brand new Renault Power steering Pump fitted to my powder coated bracket Afew bits i got powder coated from a place in work Afew pics of bits fitted

Sorted , it was just quite not sitting rite had to get it between e manifold and the pipe at the top of e steering rack ! i wouldn't let it get the better of me !

I'm in the middle of putting my Clio 172 back together . ive fitted the 182 manifold but I'm trying to fit some replacement pas pipes but I seem to be struggling to get one lined up as I'm not sure if something is fowling the pipe so I can't get on it at the right angle . im just thinking is...

Ok cool , will have a nose on whats on offer