Search results

I don't know if you noticed? The aluminium 1.5 tonne only lifts 35.3cm. The aluminium 2 tonne lifts 47cm. The low profile 2 tonne lifts 50.5cm which is better for me if I want to get under the car. I've had mine for about 2 years now and it's been well worth the money.

Carpro Dlux. Makes fading plastics black again and lasts for well over 12 months.

I'm glad you got it sorted 👍

I did a half arsed explanation with pics when I changed my fan. Post #6 https://cliosport.net/threads/guide-needed-for-removing-heater-blower-motor-from-clio-mk2.834181/

No. You have to remove the scuttle panel therefore the windscreen wipers. The more room you can make the better. Like @Darren S said. Make sure you relocate the wiper mechanism back onto the little metal pin in the middle just under the windscreen.

To be honest my headlight washers haven't worked for ages and I'm not bothered. If I remember correctly, the pump on the right is for the screen washer jets so maybe the rear screen too as its a two way pump. They're a bit fiddly to get out. You have to remove the windscreen wipers to remove the...

Sounds like the pumps knackered. I fitted one of these not long ago and it's been spot on. Also check there are no kinks anywhere, especially where the tube comes from the pump itself into the bonnet. https://www.amazon.co.uk/gp/product/B0068M0ZTK/?tag=cliospnet01-21

£876 from Larkspeed for wheel and tyre package. That's with a 195 budget quality tyre,whatever quality budget means? https://www.larkspeed.com/index.pl?p=SP2120716ANPK&a=i

Oh right. I never knew that. I've seen the question asked before. At least you're sorted now 👍

I don't think you can. Have a read of this. https://cliosport.net/threads/changing-lhd-headlamps-to-rhd-headlamps.840567/

Usually with the resistor pack the fan only runs at one speed. It's either on full or off. Sounds to me more like the fan itself.

I fitted one of these febi bilstein washer pumps a few weeks ago and it's sealed fine. I'd check that one of the pipes isn't kinked anywhere, especially where they come out of the pump and go into the bonnet. I noticed mine had kinked slightly and the spray was only trickling out...

I totally agree with you 👍 they're well worth spending the money on to keep them on the road. If I hadn't been the first owner, from new, I might have felt differently though for some strange reason lol

Looks like they've done a cracking job Darren 😊 It sounds a lot of money, but when it means keeping it on the road it's well worth it. I reckon my 182 has had somewhere heading towards £6k spent on it in the last couple of years 😲 but it's looking better now than it has since i bought it back in...

They're the original speakers fitted in my 182. I fitted a new Sony MEX N7300bd head unit a couple of months ago which already has improved the sound a bit. It's just that I'd noticed a buzzing noise coming from the drivers side door speaker, the cone has a small rip in it. I've repaired it...

So you're saying fit coaxials in the front not component? I'm not that clued up on audio in cars Tbh.

Rather than start a new 13cm speaker thread I thought I'd jump on here. I hope you don't mind. 1 of my front speakers in the 182 is buzzing a bit. The cones ripped. If I was to buy components with the tweeters. Can I just change the speakers in the door and leave the factory tweeters, will they...

They are NLA. My 182 has been in for an insurance repair recently on the front bumper and bonnet and was held up waiting for an offside arch liner after being told they were still available from Renault in France. Eventually the information came back that they weren't available anymore.

I'm not that clued up when it comes to in car music. But I've just fitted this a few weeks ago and it's a big step up sound wise from the original head unit. I'm still a bit old school so wanted the option of a cd player. I've been slowly putting music on a USB memory stick and using this more...

Welcome to CS. As hopgog1 says. I'd look at getting a 2nd set of wheels and keep these original 👍

Borg and beck handbrake cables you need. https://www.partsinmotion.co.uk/manufacturer/borgbeck/braking-x/handbrakecables/by,pc.ordering,product_name?keyword=

These are the ones I have on my car from ebay, with a cup spoiler. They fit perfectly 😊

They don't open too far. I have them fitted on my 182. The SGS ones mentioned earlier were never smooth and felt weak when lifting the boot. The ones I posted make the boot lid feel so much lighter and a much smoother action 😊 Why buy BMW struts when you can buy the correct length struts for a...

Ive had some from SGS Engineering and i wasn't happy with them. They always sound rough when opening and closing the boot and didn't feel that strong. Ive just replaced them with these off ebay and now the boot opens and closes better and smoother. https://www.ebay.co.uk/itm/165076808883

As far as I know all 1*2s use the same Bosch lambda sensor, 0258006046 If you go to Renault prepare to have you pants pulled down an buttocks splayed 😮 Have you tried plugging the rear into the front to make sure the plug fits? https://www.ebay.co.uk/itm/303441549650

They're busy on Monday. I'm booked in for 8.30 😉 Like @imprezaworks says. They're good lads 👍

These look like a similar type of design. Maybe message them for the size. https://www.ebay.co.uk/sch/i.html?_nkw=Universal+runner+exhaust+mount&_pgn=2

Thread bump. Does anybody know who the guy is who had made some led boards up for the spoiler brake light and which of the Clio groups on Facebook he was selling them? I saw his post a while back but can't find the post anymore or remember which group he was selling them in.

Sent you a pm.

Nice one. Thanks for the info. Much appreciated 👍