Search results

Based in Leeds Cheers Paul

No problem. Take a good picture of your ecu and send it to me and i will see if i have it in stock. Sometimes they have slightly different ones fitted and it causes problems

After doing alot of 172/182's the remap ALWAYS makes a good difference, mods or no mods.

Direct before and after to show the gains.

I think it's the way the torque limiter is. I see alot of diesel stuff do that.

On a totally stock 172 and a totally stock 182 the 182 seems to give slightly more Paul

It's false economy on that engine to run 95 as it will do more MPG with higher octane. I have seen a couple pinking quite bad on standard fuel. Get some 98 in there!

Here is the graph:

Yes if the dyno does not have temp correction

You don't need to be in a sealed room to get repeatable results. Check the graph above. IT=Intake Temp and AT=Ambient Temp, The DD corrects the power using this also. This is why you have to watch out for low AT and high IT. The figures could be wrong! Paul

I think that's the first time i have seen a dyno dynamics graph on here that's got all the right numbers on the bottom! That won't be far off an engine dyno figure believe it or not! Paul

YH04 EWZ, black gold 182, anyone :)

I think i can get you in actually

Mine died today, had to push it off the dyno! Seems to be the pump i think as the rely is working, maybe the same.

Certainly have mate:D

Depends what you want mate, the basic map with no dyno is 295 then you can either have before and after runs or a full setup on the dyno. Cheers Paul

I never use other tuners maps, all maps are from the original. Paul

Ran it on my very own dyno :)

Ran one of our tuned files first and it made 89.6hp and 163lbft, Then loaded the standard file. It made 70.6hp and 125lbft. I'll post a graph when i get chance to scan it :)

Yes mate we open 9-1 on a saturday Cheers Paul

:mad: idiots, Funnily enough that happened to my mate the other night! Made a good mess and the bloke got up and ran off! See you then

£295 for the map, if you want any dyno runs they will be extra. As for the increases. You should see 10hp and 17lbft, ish!

Our standard map is not an off the shelf generic map. I have spent hours and hours on dynos with different cars and different combinations of mods so i can accuratly create the map for nearly any mod from scratch. Paul

about 7-10hp and 15lbft and they make a noticable difference. So 100% worth it :)

Are you wanting one of my standard maps to suit them mods or some fine tuning done on the dyno also? Paul

Remap makes a great difference on the clio dci. We have done loads now and never had an unhappy customer

LS6 2DR mate The site is been uploaded at the moment so it's not quite working :( Soon i hope :D

Ish, i have not connected everything yet but seem to be getting the hang of it. I get the official training on thursday so should be spot on :)

Tested the dyno today with the trusty old valver :D Seems to be making about standard power if i did the run correctly lol. 106 at the wheels Playtime tomorrow!

It will basically give me more time to setup the base maps and give the option of a more custom tune with graphs. i will certainly be looking at the different load sites more to see what we can get :)