Search results

Dont you have any small local fastener shops?

It's metric if you use an ugga dugga.

If struggling just drill out and tap to metric.

https://www.pistonheads.com/gassing/topic.asp?h=0&f=23&t=1656653

Got any verniers? You can print out a thread gauge and measure it against it too - https://www.boltdepot.com/fastener-information/printable-tools/default.aspx

Theyll make you bust for the 16 you need

Read this a few times on the mikalor clamps now! Might be worth updating the guide on here so other people arent caught out. I've ordered the JCS Higrips.

Boot lock broke

@leeds2592 might be why yours is so tucked. Probably running some custom 40mm parts bin specials

I'll confirm when I do mine, but they should all be correct.

Not wanting anything that will dig into the pipes over time. That's why the JCS HI-GRIP are perfect as they're stamped and have a smooth inner edge. So I received my Silicone hoses and measured them all. The dimensions are as below: 18.4 18.5 18.7 20 24.3 24.7 25.65 25.7 26.2 26.63 32.5 33.75...

Worst designed in the sense of the flexis being made of string cheese.

No and why would you want that? One of the worst designed parts on the car. Just direct the noises out the back of the car and itll reduce significantly then add sound deadening within

I'd heard similar before but I guess you dont really go for amazing food. Covid will always impact turnout especially with local lockdowns and the like.

That's a long way for a cup of luke warm coffee 😯 Why didnt you like the place?

I'm full black series polybushed, evol dogbone, vibratechnic mounted, b14s on solid topmounts and run a decatted non-resonated milltek exhaust on polybush mounts. I also drive my car everyday to work and use it everywhere. It's not bad at all, admittedly I've put sound deadening on the rear...

@0ss Thought my exhaust was too quiet and needed more noise.

Giant thread here mate - Yaris GR

Buy that one for £30 and sell it to @Ianvdh for £40.

Has Santa gone?

Wrong one senòr https://www.ebay.co.uk/itm/202919945020 Think you did that just to get me to send you the link tbh.

This photo taken in the same third world country as the OP?

I tried brass bushes and hated them. Just stiffen it up way too much imho, especially if just trying to adjust the linkage on the box end too. Makes it impossible to get any feel of the box. Just Ebay search 'scenic repair kit shifter'.

It just looks like it's at an awkward height now. Too low to walk under it, too high to lie under it comfortably.

I know these gear shifters inside out now. Best way to stiffen them up for more precision is just to buy the scenic repair kit on ebay. The plastic ball has grooves in and these wear with age. The full rubber casing also softens meaning it just slops around. Equal to a yanoo v1 with all new...

Can do yeah! Problem with the 1.2's is that they spit out standard centre caps for fun, but I reckon that's down to the metal ring used heating up.

Just fill it with epoxy and press it back on

To the left. Right is 5th

Hold the shifter in reverse and then put the box in reverse and nip it up. Then you can finely adjust the bar by moving in and out/left and right. It's a proper b*****d. I spent 2 hours doing it by myself and it's still not right.

Do you know the dimensions you used?