Search results

Cheers , I have had a set of rears on my trophy and one of the adjusters wouldn't turn from new and a front and rear set that have been revalved which when I went to stiffen up the rears at my oulton track day found oilcoming from the adjuster shesh! At least MF sorts them out pronto.

Hey Chris The coilys look very good , much better than the leaking koni's I fitted to mine! Pity I can't run coilovers. As ever nice progress!

Lower springs but not sure of the rate - may be a "secret" ;)

I have Koni's on mine and Mark Fish has revalved the rears to make them firmer so I can make the rear stiffer to control the understeer. I have currently got the standard springs on until my custom springs are done. I have just had the suspension set today at -2.45' neg and 1mm toe out on the...

Bet they dont stay that way ;)

Thanks. Fitted it today on the original cross members so don't need a frame I will put a picture up tommorrow.

thanks - which seats are yours and do the frames mount the seat low or level with the tunnel side?

hi mate thanks for the info i was going to get them via demon tweeks but because i have the gt version seat its too wide for the mounts :mad: looks like i will have to make some up in work but to be fair £86 for a bit of bent metal is well steep. also no reply from yozza - but not suprised

I assume the plastic cill cover? Tried yozza but they are hit and miss waiting for a reply,need the frame sharpish :(

Hi I am at oulton on the 13th nov. I think I want some of the x-low frames from cobra but I think they take a couple of weeks to do. Have you fitted the ybracing ones yet?

Hi Can anyone recommend a subframe to mount my Cobra evolution side mount seat. Was going to fit it without but havent time to make a frame as I need it done for next weeks track day. Cheers

Ok seams straight forward enough to do. Thanks

Nice one Chris got any pics of the diff and final drive end?

mine does this but sounds like it comes from the left rear? no fault lights on dash though as I changed the faulty sensor. sorry not much help

Didnt fit them I was told the bottom arm bushes have more movement than standard and I "may" see a small improvement on the anti roll bar so sent them back to K-tec for a refund minus 25% re-stocking fee :mad:

A few updates on my blog :)

Cheers fellas I assume you have had no problems with yours asside from end of season rebuilds?

Go on then wot you upto?

Cheers I think that's around the weight of the trophy trendlines. I'll get them weighed and post it up on my blog and thread.

pair of what ? buckets?

Hi Jay Nice car ! Dont suppose you know the weight of cup front and rear seats and the ph1 leather with air bags off hand? Cheers

Hi I have just received mine for my ph1 from k-tec the sizes are Wishbone kit 301 030/mou/pfx/002 Anti roll outer 030/mou/pfx/009 22mm Anti roll inner 030/mou/pfx/012 25 mm HTH

Hi I have some k tec ones I can measure them later if you wish. Why are they a pig to do?

Oh ! Any idea what or where I can find info on gearbox ratios and final drives for an early phase 1 box. Cheers

Could be possible as my budget is rapidly disappearing :dapprove:

How long ago was this as I have been told the early ones suffered with poor quality control which has now been resolved !?

Hi I have used a quaiffe in my rally mini without problems so nothing against them. I have been assured that the gripper is far better in terms of performance but have been told that the early ones suffered with reliability

Anyone?

Hi I am about to invest in one of these for my hill climb car (see my project thread ) If you are using one can you post your thoughts on them and if you have had problems what are the alternatives? Ps I don't want to use a quaiffe type. Cheers

Anyone else using these diff's had problems with them? Don't want to spend 2k on a duff product that's going to take the box with it!