Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I put some slick 50 with P.T.F.E (Teflon) in my motor the other day, being sceptical about that sort of stuff working, thought I would give it a go.
It works, Im shocked:o. The car is much better, less engine noise, flat spot I had in the mornings has gone, and it pulls much better now, sounds...
Fitted a sub and infinity speakers and an amp in my motor at last.
http://erc.qmuc.ac.uk/cliosport/gallery/full/1070412720__car014.jpg
DB Audio Raptor, running off the amp sounds really nice.
http://erc.qmuc.ac.uk/cliosport/gallery/full/1070412846__car016.jpg
Got 2 infinity speakers in...
be very careful fitting this mod, reno electrics are not good at the best of times, if your not sure how to fit it, consult an auto electrician. Fit it to the wrong circuit and it could cost you hundreds.
A common problem, its the accessory belt idler pulley, the bearings start to go for some reason on them.
I would recommend getting it done as soon as possible.
It may be something else but thats the most common fault.
I got climate control on my 172 it works great, I press the demist button and it does its job very quickly.
Sounds like yours may be faulty, the AC system has a sensor in the pipes that will shut off the AC if the pressure of the gas in the pipes drops to low.
An easy test to do is to open...
I specialise in Renault alarms, first the few basic checks you can do, I have found on a few occasions that the interior sensors (the ones on the screen posts) are not facing the rear screen, this causes false triggers.
The sensors must be facing the rear screen.
The next thing to check is...
If its a faulty steering colum etc. it will be 100% warranty, if its a noise caused by a trim etc it will be a contribution from Renault and the extra has to be paid.
You have to remove the door card(trim), this is fairly easy to do, once you have removed the trim you will find that the handle is held in place by two 10mm nuts, once undone you will have to get the handle at the rite angle to get it out, you can also remove the link rod at this stage.
Its...
Get the 172, got a great list of features, the cups a bit plain for my liking but a little faster but only very slightly. Depends on what you want really but the 172 wins my vote.:)
Take the wheels off, have a good look at the brakes and anything else you can see, most problems stick out like a sore thumb.
If all looks well wash your front brakes off with some brake clean, put it all back together and give it a run to see if its any better.
If not get it down to your...
Just a copy of my previous post
7700425846 it costs around 150.00 inc vat
I have not looked on actis regarding this matter but on the forum it has been said that this is normal for the cups.
So if you dealer says no, try it as a safety issue or if not you will have to pay.
Its not a job you...