Search results

It's a Golf DTH setup Morgan. The trumpets are 120mm. I don't, but you could work it out as the angle is 22.5°. I asked Jenvey how much they space the trumpets out but they weren't much use.

Yes. I also asked what the angle of the bodies is but they didn't know. I measured the angle of the head inlet face and that's at 10 degrees, so I assume they will be inline with that. It's making me lean towards the SF setup, I wonder if 150mm trumpets would fit?!

Jenvey make 110mm long 40 degree angled trumpets. Or you could make some angled spacers. I love how ktec told me that 90mm would fit on the DTH bodies with just a shorter rad and shallower filter. And that 120 would fit with a bit of bonnet cutting......

Leaving Llandudno area. Reg J400 VEL Looked great on the road!

Bronze looks like they're muddy. I'd go silver or at a push maybe gold.

Battery

Ooh I'll get some of the rack bushes when I fit a Dci rack. Scratch that, they mount directly....

I wouldn't mind having a go with a RS2 inlet on mine. I've got the Piper cams with headwork and 182 manifold. It makes 184bhp and 173lbft on the RS Tuning rollers. I think with the RS2 and 50mm extensions I could make some more power and extend the torque curve a bit. But its a big risk when...

Would be nice to see figures with the extra 50mm spacers on the RS2 and cams. Would that need bonnet pins?

Good to see it works with cams. But with Itbs you'll see another 10-15bhp and lbft. Interested to see the graphs overlayed too.

Have you got any headwork or just the 421s?

Looking forward to see how you get on with this tomorrow.

I've got the ktec recessed. Sounds like an oem upgrade I.e astra nurburg with the remus. If I had the money I'd get the PMS system though.

Its only in 3 door. Ideally I was looking to replace the ph1 and my wife's Fusion with the new Clio but it's not quite what I want. Megane 265 cup/trophy would be my 1st choice but that's 3 door only too. Not sure on the Focus ST. Could get the pumaspeed 320bhp/370lbft demo car for the same...

I drove the Clio today with lux and cup packs. It rode very nicely damping and roll control was brilliant. Handling was good although I felt there could have been a bit more feel and less assistance on the steering. I would prefer a mechanical diff to the e-LSD it has but it works reasonably...

Looks great. I love the ph1. Here's mine

Taking the wife to see one on Saturday morning. See how it goes!

Have you contacted DTA?

I really fancy the new Clio and I'm in a position to get one just after Christmas. But I am wondering whether to wait and see what happens in terms of development with the chassis, engine and transmission. As the review suggests its early days and with all the RS cars there have been...

Looking at getting rid of the wife's car and my Ph1 for one of these. I know ktec have an exhaust and filter available and an intercooler in the works. What is there in terms of decats and remaps?

Yeah that's it :) might do that when the weather starts warming up again next year.

I suppose doing it that way you could modify it for a bit of caster at the same time.

Interested to see pics of the ovaling if you've got any?!

This is what I intend to do. However it seems quite a challenge to get a cheap cup subframe.

Looks lovely!

Trumpets on V engines can curve at an angle for bonnet clearance but they curve from round to oval, they don't stay round through the bend.

I'd run ramair filters, I did testing on my 195bhp zetec, it made 197 without filters and 195 with them. http://www.ebay.co.uk/itm/2-x-RAMAIR-Carb-Sock-Air-Filters-Ford-Pinto-Weber-45-DCOE-/390567229622?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5aef9ef8b6

So if you take trumpet length out of the equation. How long are the DTH and how long are the SF + MR23 manifold?

Jenvey do some nice 110mm 40 degree angled trumpets. And this is in interesting read regarding trumpet angle. http://www.emeraldm3d.com/articles/dec2012/ I would get the Gen90 with the software and take it to my local(ish) mapper who does GEMS. Or I could go to RS Tuning, I took it there last...