Search results

it 100% works on a second hand key just to remove the chip from one fob to another, ive done it

I said it would be a one off but I've done another one as a present for a friend. It's going to get anodized next

have a read here http://www.cliosport.net/threads/grand-scenic-key-card-question-and-help.770579/

couldn't a new button be soldered to the board? failing that remove the chip and put it on a working key and you wont have to pay for reprogramming

Panel craft btaintree are awesome Did the full repair on my 182 when it got written off

Bearing is in the right way, just wasn't the right way up for that photo. Just seems a lot of play considering its tightened

Ok so then is this right? This is done up as tight as I can

What is the correct order to put these back on the spring?

no word of a lie, the guy from autoglass got this stuff out, put a big blob on the sensor in stuck it on. I asked what he was using and he was using that, he was a very helpful guy and said feel free to make a note of it. which I did, since he did mine over 2 years ago ive never had an issue...

this is the stuff autoglass use http://www.shop.aycesystems.co.uk/windscreen-gel.html

trying to find it, hang on. you used to be able to buy the gel on its own, as soon as I find it I will post

you can buy the proper stuff autoglass use when replacing the windscreen.

you can buy the gel, I posted what is it somewhere on this fourm year ago

http://www.cliosport.net/threads/boot-lock-wont-open-help.689310/

you will have to go in through the rear seats new locks are like £20 I think

mine came out fine

didn't have any issues on the 182, but cant remember if I used spanner or socket

saw this the other day, really an MX5?!

I just got a dell inspiron 5000 series 17", I do a lot of 3d work in autocad and it works great for that

Washer bottle is actually easy to get to, Remove wipers Remove plastic panel Remove wiper motor (it's just three bolts) Then you can remove whole washer bottle

Bit of googling and some faffing and got the hh4 working. So got the hh5 in the house and the hh4 in the work shop connected via a long Ethernet cable. Seems to be working well

oh I see, is that just a tick box or a bit more involved? will google it later

The hh5 is working again now. I've connected a Ethernet cable to one of the 4 sockets on the back of the hh5 and ran it to my workshop, I've then plugged the other end of the Ethernet cable into a hh4 but I'm not getting any Internet. Sadly I'm getting the orange light not blue light. I know...

I want something that comes with windows preinstalled so I don't have to spend out for license and stuff.

im not totally clueless about computer I did notice he was talking utter s**t lol what is it? can I plug a keyboard, mouse and screen into it?

ive got to move my cctv desktop and bits into the bottom of the wardrobe and its not fitting very well, so im looking to get a small form factor pc. currently im using a really old HP pavilion 743.uk desktop with Pentium 4 cpu 2.53ghz with 1gb of ram id like to get an upgrade but something...

Bearing above spring in damper?

Ok thanks This is all halfrauds had, I don't care about brand just will this do without damaging the gearbox?

errr there was s**t loads of oil over my driveway so it could well be close to 3 L ok so fill right to the top cheers, I already have one of those funnels as it goes

Whilst dicking round with the spring and damper I managed to break/pull the rubber gator off the drive shaft dumping all the gear box oil over my drive. Would I have lost all the oil or just some of it? How do I check the level so I know how much to put back in?