Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
well all I have to say is what a total t**t I am!
after taking things to bits for the forth time I worked out what the donking was. I haven't done the pinch bolt up tight enough when doing the wish bone and the pin the coming out of the hole.
but whilst doing the bolt up I managed to empty the...
again? that's original in there mate, 10 years old now.
um sounds interesting got anymore info?
a week after I fitted the new wishbone, I did jack the whole of the front of the car up, loosen the ARB bolt and re tighten. just in case it wasn't in right.
not sure if that's the right way to check?
think so, it fully extends. I didn't need to pull it out
I put the spring you gave me in tonight, so it cant be the spring, its not the damper then wtf....
current one which will be hard wired in is a few years old and don't have a link. its called a mega pixel ip cctv camera, its got a 1mp sensor and records at 720p apparently
but this is the new wifi one I want...
ok thanks, so I could put wifi in white ones? or would usb wifi be best?
errr directly to wifi card in pc, I don't want the computer to be connected to the web in anyway
due to the location of one camera its a million times easier to just use wifi, otherwise I would plug it in.
so does that card require any minimum spec to run, cos this pc currently wont meet it.
with regards to the internal photos, you have 2x white slots and 1x black slot, they are...
just "borrowed" an HP Compaq dc5750 small form factor desktop from work.
I know its pretty rubbish but I just want it for doing cctv with, it will replace my even older one which I currently use.
as this is a work pc it will be the most basic spec money could buy, sadly the cpu had a block of...
didn't notice it looked wet but then again I wasn't looking. will try bouncing car tomorrow
no idea but something really isn't right and it still making horrible noises
took everything to bits again yesterday as after putting the spring back into the cup it was still making a donking noise.
the top cup where the spring had come out of looks like this, its got lots of scratching around it -
where as the other side (drivers side) the top cup doesn't
so...
ok interestingly just driven the car and the noise is back so the spring must be working it way out!
what could cause this dodgy spring or dodgy spring cup holder thing?
Ok taken things to bits and this is what I've got, don't think the spring is broken but has been dislodged.
Would people agree?
But I do have a crack here, is this a problem?
AlexW kindly just loaned me a spring so I can get the car back on the road. so ill get that in tomorrow.
ok ill get the cooksport ones, ill order tomorrow