Search results

Re: Mk1 Hybrid Project Just a few proper pics.... Complete History from 1996ish until present, madness! Drives nice, its been well looked after for sure :)

the bushes make a big diff imo, get it done... i can feel it driving the other valver.....alot better

guessing you would need a full interior loom to run the port? or could it not be spliced in?

Re: Mk1 Hybrid Project The Runaround :) Cheers Martin

Just a thought would this whole thing not be easier just to put a diode across both input pins of the relays. for example from pin 85 of the headlight relay to pin 85 of the fog light relay. this would then use the factory looms :)

So the facebook messages from your Mrs asking if the G220 was any good went to good use, good job I said yes it was ;)

http://www.flickr.com/search/?w=all&q=las+vegas+landscape+night&m=text Can usually get the full res versions, ideal for desktops ;)

I had no spare wheel or jack etc, no tyre foam either, they didnt say anything...

i was just about to post the link....then scrolled down, lol ;) Couple more of mine though: Claying a Car: http://www.vimeo.com/1075412 Lowering a Car: http://www.vimeo.com/1130968

Re: Mk1 Hybrid Project ;) http://www.f0xy.net/ The new blog is up, along with some other bits and bobs, going to put some guides up that ive wrote, started a parts number mini database which will hopefully help some people, and some other stuff! hopefully alot better than the last.....more...

Great photos

yeah the 40d does that.

ah fair enough

i think it might be keano or something off v6clio.net, spoke to him once when I spotted him

Re: Mk1 Hybrid Project 172 stuff possibly yes... ive bought another valver to keep me going as a runaround... http://www.cliosport.net/forum/showthread.php?t=378067

Re: Mk1 Hybrid Project Not got a spare fuel pump at the moment....Anyway... UPDATE :approve:

they only fit the lower spec hubs, 1.2/1.4/1.6.....check mini-valvers project thread (k4m project)

the 406' brakes fit under 15s if you use 10mm+ spacers....check mini-valvers project thread

Re: Mk1 Hybrid Project both were changed yep, 2 days back when winston was here

Re: Mk1 Hybrid Project Eventually got it going earlier....Kept turning over and not firing for a bit, then started trying to start.....gave it the full throttle while cranking treatment and it fired into life, and idled fine. Drove fine for a few miles, then spakked again. Thought id' try the...

i never used to get over 40 in my 1.2 16v....unless i did 60 on the motorway for loads of miles it would go to 50 odd, but never usually above 40

Re: Mk1 Hybrid Project Well not changed fuel filter yet...just went to move it off the drive to let my mum get her car out, and it wont even start....meh

Re: Mk1 Hybrid Project Right now then... Took the plastic tray off, swapped all four plugs to the other set of NGK ones, and swapped the HT leads... Still does it after a bit of driving......but only starts going it when turning right, ie roundabout, junction etc....guess Il try and swap the...

nice pics as always

Re: Mk1 Hybrid Project Yeah the engine spacks a bit like its missfiring maybe....I just had an idea though There is some gay plastic tray that the HT leads usually run along, that I never had on before (1month+ ago), so It technically could be the HT leads arent pushing down on the spark...

Re: Mk1 Hybrid Project checked the earths again earlier, cleaned up the connections etc. Went out for a drive then to get petrol...ended up not getting petrol due to the key hole for the cap being frozen but anyway went for a drive (20 mins ish)...just as I was within a mile of home it started...

Re: Mk1 Hybrid Project Highly doubt it would make the rev counter go mental though as its electrical.....

Re: Mk1 Hybrid Project I acctually havent lol, its sat in the box in the garage, its the only thing ive not fitted from what I purchased.....on the list for tommorow, last resort tbh

Re: Mk1 Hybrid Project Yup aye know exactly where it is. I have a valver, ECU, tried running it on that in the past, it would run but pretty dodgily. Suppose its worth a try to see if the rev counter plays up with that one on too Nah, the revs just started spakking so I let off, and put the...