Search results

severside motorsport is just up the road from me lol, ne way esp design make 1 for the 16v that will bolt straight on its called an evo rear difuser and it costs 139.95 each tel: 0870 7518000 tell em mike hunt sent ya ;) MaLicE

weight what size bolt is it that i need ?? MaLicE

right i need help now i have the money to lower my car i have 195/45/15 alloys and if i measure from the top of the arch 35mm down i still have about a 50mm gap from where the arch will be to the tyer. so i thought about going for a 55mm drop wich will leave about a 30 mm gap from...

try soaking the bar in wd40 overnight MaLicE

i would most likely say u fuxed um if u can get a tap u should be able to take it out or if u got a steady hand u could drill it out MaLicE

me but why not post in the thread he made then he has more chance of seeing it MaLicE

dont spose u measured from the arch to the top of the tyer before u had it lowered then measured afterwards did u ??? if u arnt happy i would take it back to where u got it from and ask them to fix it as u rnt happy with what u got from the sale MaLicE

cos they are wound tighter 1 way so towards the top the coils should be far apart and at the bottom they should be close to gether or the other way round. MaLicE

it will lower it straight away but after a while once bedded in it will go even lower but if u just had front done u wont notice a difference. MaLicE

it should be lower have you just lowered the front and was it just springs u did or was it a full kit ??? did he lower the back and yeh it does take a while for the springs to be in. MaLicE

d00d nice thankx for all your help when i do my car next week u get all the credit for the rear end. cheers bud 1 last question did u run in to any problems when doing it and doesnt the tortion bar also have a spring with it ? MaLicE

thankx man might see if i can get a 40 mm kit from some where sorry girl racer MaLicE u recon u could maybee take me some more pics tomorrow so i can see your master piece?

u r a good man im buying this week a kit and i was confident i was able to do the front but every 1 said dont touch the rear its soooooo hard to do now you have proved it isnt that hard. im thinking of getting either a spax 55mm drop kit with front and rear shocks so i will have...

god u are my idol i was just whodering how to do this and u have showed me. ok a couple of things when u put the bar back in and measure from the ground to the centre hub do u mean the brake hub??? and 1 spline rotation is 30 mm ??? what suspention u got on the front ??? and...

i had my car de catted to day hair every where :) no had cat taken off and a k tec bypass put on and OMFG i cant believe it soooo much more noise and quiet a bit more grunt too. MaLicE

u play with each other or the scalextrics ???? when we went to america there was this shop dedicated to scaleextrics and they had a 6 lane circuit which had cross overs but the cars cost like $500 and did stupid speed of up to 50mph the shop owner had the world record for the fastest car...

u play with each other or the scalextrics ???? when we went to america there was this shop dedicated to scaleextrics and they had a 6 lane circuit which had cross overs but the cars cost like $500 and did stupid speed of up to 50mph the shop owner had the world record for the fastest car...

ok can you help me ??? i want to lower my car more than 35mm what do you think is the best kit i can get for 300 quid ?? ne ideas MalicE

tell them u will take them to small claims court that normally works. how far are they from you ? to far to travel ?? MaLicE

but if you want your car to look nice by lowering it isnt it up to you what you spend your money on, if you have an idea for you car which may be your pride and joy or if you go and do somthing and wish to share it you dont need somebody coming along and pissing on your fire do u ??? how...

i said i dont want to do that i just want a kit that is there and dont need fussin. MaLicE

um well if u can find me a ready made spring that is 50mm drop at front then i will go with that im after a big drop that is why i was interested in coilovers, and i dont want to faff around with heating springs. MaLicE does suspention for 16vs and willys fit a rt??

do willy or 16v shocks fit on rts as k tec have a wicked deal on some coil overs for the willy . MaLicE

right i have an rt and i neeeeeeeed it lowered its on 15s and needs it badly. 1 what shocks should i get 2 where from i need places people as i cant find anywhere myself. MaLicE

if we could see it then maybee we could help

u can buy xenon lights from demon tweaks they are around 300 quid and that is the full assembly MaLicE

if we could see it then maybee we could help

um all they have to do is look under the car and will see summit quiet big missing. not sure about radom checks though but i would like to know as im thinking of gettin a de cat pipe. maLicE

i was told 260 for the avo coilovers. MaLicE

ok i got 300 quid possibly more for suspention what do i go for i really want 50mm front drop i think maybee less what do u think i got a clio 1.4rt 5 dr with 15" alloys on 195/45/15 goodyear f1s. what kit should i get as i have friends that can fit it and do the torsion bar so i go for a...