Search results

Search for Renfort on ebay. I fitted one to mine, some info on here https://www.cliosport.net/threads/renfort-diff-plate.822374/

Crushed jacking point should be ok for mot @chris blue it will only fail if rusty and holed.

Changed the turbo on Monday for a used ebay £40 special. No pics as oily as feck diesel, compressor housing seal was on its way out and leaking oil onto the cat and into the boost hoses making it a bit smokey on boost, and siren noise on spool indicating out of balance. I fitted the turbo 25k...

Better off using the box section a few inches behind the sill with a decent low profile jack

Go down to 45 profile on a 16” rim mate, thinking about it i had cup offset turinis on my dci briefly on 205/45/16 no issues up front

Vibratechnics top engine/gearbox mounts are sound for road use, when fitted properly/broken in. I have a purple powerflex lower dog bone fitted with the vibratechnics, hardly any vibration or engine movement(y)

Mine is on 15s so no idea mate ill be honest

Can only assume the valve has failed due to fatigue, might have had lots of abuse from previous owners?

Not much difference from memory, mine are 172cup. They are a few mm shorter than the dci shocks so stops any chance of springs falling out.

Rear cup shocks go straight on, cant get away with fronts sadly. Mine is on sachs oem replacement on the front as originals were knackered, seem ok for road use.

Pms shifter kit, transforms the shift. Next mod lsd, then just drive the nads off it and enjoy

Sensor should only trigger on low oil pressure so would not expect it to trigger when revved as oil pressure should increase ? I would replace it and go from there. If worried hook up an oil pressure gauge and see whats going on.

Looks well, mine is on cliosport eibach sportline too and drives great. Bang some cup rear shocks on if not already fitted, makes quite a difference.

Awesome looking mk1, so much want. Bet the extra power has made quite a difference on track

Cheers mate (y) booked it on for the Cliosport festival pm track slot so will be on then. I was going to do Croft on Good Friday but left it too late to book sadly. Need to get it out more often

Sound will give it a go, 2 trackdays probably not bad with the heat off the brakes. I have some deposits on mine now that fallout remover wont shift after Croft last year sadly. Im not sure what the bore size is of the f4r but just go to the same size or as close as, thats all i did and the...

As above new squib is needed. I tried to repair mine but was totally shot, was doing the same as yours only working in certain positions before it went up in smoke. 2nd hand cheap enough

Mine done the same when the pump failed on track, assist then no assist etc, nearly had a moment with it happening mid corner. New pump and fluid, running fluid on minimum on track and no issues since.

Squib wiring is probably melted together. Mine went up in smoke a while back. Bang a ph1 indicator stalk on with push button to bypass it

Cheers mate. Impressed with the Gyeon, first time i have used them. Might try the Rim, how does it hold out on trackdays ? I have been using finishkare 1000p but have noticed it goes spotty when hot. I bought the wiseco tapered ring compressor off ebay mate from a motorbike shop, not many...

Cheers mate. The Gyeon q2 trim is a permanent trim restorer for plastics. Claims to last 24month no fading, will see ! http://gyeonquartz.com/product/trim/

Some more pics now the Gyeon q2 has settled in. I was worried that the cold evening on Sunday would knacker it up as 24hr cure time and should really be left in the garage whilst curing, however its cured lovely to a near oem finish now. Luckily picked the right day to apply as its pissed down...

The boot latch has a microswitch on the later mk2 clio's, easy to replace.

Same amount as my Kangoo that ! Mine is on the monthly too as i cant be arsed paying a lumper on tax.

Also binned the carbon canister valve a few weeks ago as sick of the ticking on idle. Got a few miles out of it before it chucked the eml light on, so fitted a 22ohm resistor from rs components £2.60. Made a small loom to plug in which has worked great, no issues resistor does not even get luke...

Big spring clean for the Kangoo today. Been using it loads recently but not cleaning it so wheels were black with brake dust and was looking a bit unloved. Pre wash & AF snowfoam BH Korrosol on wheels and bodywork as iron fallout all over it Next step was 2 bucket wash, followed by drying and...

No way, i thought the vans were the same £30 a year tax:(

Looks well, simple lows and clean look works 100%

Will give it another go. I guess it needs some brute force ? They are a godsend on some jobs mate. Ive just sold the sealey one in the pic cheap as have upgraded to high torque dewalt impact wrench. I have another sealey one here that needs a battery if you want it for nowt. Cheers mate. Its...

All done and dusted earlier on ths week, new clutch feels awesome, mega light should have done it years ago. Had toe set yesterday too so good to, go for plenty of miles. Cruise to fit next. Can anybody give some tips how to remove the metal ecu top cover? Cant get it off and ive been pulling...