Search results

Cheers mate! Lol!! You just can't get enough!! The pilot I had today was called Dave today and he was a proper nice guy! There were 3 pilots in total today taking people out for the flights. Words cannot describe just how f**king awesome that was!

Arrived at duxford. In the AG obviously! And now things are starting to get much more exciting! Had to have a 30 second long excitement piss!! Lol! Just waiting for my flight briefing and I'll be in the air before 1pm. More to come. :cool:

Tomorrow this will be my office. :cool:

Yeah I'll sort all that out when I'm back home mate. Currently on holiday! Lol! Regards the gaskets and seals, I'm pretty sure that everything comes in the bottom end and top end gasket sets. Thrust washers and stuff are separate obviously. Drop me a pm next week and I'll get on all of it...

@Trophyboy2017 Get them to measure the bores. I can let you know what the upper level is for bore wear if you need to know - this is what renault specify as well. I've found that the majority of f4r's are in the upper limit for bore wear. The plans for the future sound good mate, but I'd just...

Good point actually. Yes they do s**t themselves.

Well it's run lean for some reason or another. Could've been signs of a dying fuel pump as well potentially. Very tidy car you've got there though buddy looking at the engine bay shots. That block doesn't look like it'll hone up either, but I could be wrong. Overbore is the only option then...

Standard power? Or running more boost? It could be that the heat from the engine was evaporating the fuel or knocking the Ron content down. Seen that happen before.

I've converted 130's to speedo drive before. Easy enough job, but you've got to split the box open.

'Oh f**k off miss daisy' was one of the things I seem to recall saying. Lol! I'll get them off the GoPro and on to the laptop mate when I get some spare time. :up:

Yeah got a couple mate. One with choice language. Lol

It is, but I don't miss it. It was a very fast little car in its final guise mate. Need to upload some of the in-car footage off the GoPro, it's just having time. No mate. The AG is staying in the same condition as it is now, other than improving the brakes. There were only 55 AG 200's produced...

No mate, just the memories.

Not you is it @elcie ?

How much for the bag?

They do 2 different types mate. The 19mm is the one for road use and the 22mm is the one for the track. Increasing rear roll stiffness will also reduce understeer and help the car turn in. It's also the correct way to do things rather than upping the spring rates. The whiteline will feel...

Flol! I'm glad you did! I was contemplating getting in the boot to throw the boat anchor out! I'm glad you enjoyed it though mate. :up:

Me neither mate, but the current setup on track was sometimes quite frankly pant shittingly worrying! Lol! I don't do last of the late brakers, it's just not my style, but the current setup wasn't ideal. I had to do some proper foot dancing with @Sunglasses_Ron in the car mate! Trying to haul it...

Get the 19mm pms arb instead of the whiteline mate. Far better product.

Yeah no worries mate. :up:

Dunno tbh mate until they're done. I'll let you know once it's happened though. Ah yeah seen them. £280 odd for a pair of rears and similar for the fronts ( because it would have to match! 🙈)

Ah right ok. I'm just going to run the standard discs front and rear, but get the J hook pattern machined into them like I had on the cup up front. It doesn't feel as though the pads want to 'bite' the disc if you get me? Granted ds2500's up front are probably not the best choice up front for...

You on pagid rs4-2's Craig?

Pedals are the same mate. I can also vouch for the quality of Andy's pedals!

@windle

@Typhoon is hosting all the manuals

I think the Speedline's are the restriction on disc size tbh mate. Let me know how much and I'll have a think! :up:

The cam cover holds the cams in place mate, so it's not just a simple case of undoing all the bolts and lifting it off. It's a full cambelt and pulley job off too, and looking at your picture you're now going to need the cam cover resealing. Welcome to the world of a £450 bill to sort it. You...

@Raceface_13 the cups never had the balance weight on them, so I wouldn't worry about it tbh. I imagine the balance weight is further down the shaft now, so it would foul on the chassis leg, or whatever else is in the vicinity.

Oh and nearly forgot! Spitfire flight next Saturday. Much much much excite for this. I'll have pics and video from the day. And a very sore c**k from all the excitement wanking I'll have done no doubt. 😂