Search results

They'd just take you to the nearest weigh bridge.

You'll need to do a B+E trailer test too.

Probably looking at around a 20kg saving for the glass all round excluding the windscreen. My road going 182 with bucket seats is 1030kg, so 970kg is easily done.

Do you have a weight limit for the track car? Can easily get it down to less than 1000kg.

Oh brand new! Didn't realise that. Thought that was your budget based on a car allowance. Yeah you're going to struggle then lol Something with a 1600kg limit would do it but it's cutting it close probably on total train weight by the time you add extra wheels/tools to the total.

You'll get a decent tow car for £18k! I'd look at something with a 1800/2000kg tow capacity tbh. Most of the modern estates will do that, BMW 5 series, Skoda, Ford Mondeo.

£37 is expensive? Try £120+ for genuine ones when they were new.

Rear Passenger Sensor - https://www.buycarparts.co.uk/triscan/7659430 Rear Driver Sensor - https://www.buycarparts.co.uk/triscan/7659429 They're from Germany, so take a few days but they work fine.

I reckon the bar from the sliders will smash into it.

No chance.

Just stick a bit of tape over the ends of those cut wires, just so they don't come into contact with anything. Should be fine.

Yeah that's fine. 63 milliamp isn't much, some modern cars will draw 150mA and that's classed as acceptable.

Triscan for rears are £40 ish and Bosch fronts are £30 each on eBay. Just replaced a right rear and front left on mine.

Exeter gently?

This. You're not meant to officially torque the crank bolt up with the crank still pinned, but the genuine pin tool seems to cope with it.

It is easier with the engine out, but only when it's out for other reasons like @Old Tarby! said. Otherwise you'd have to remove a lot of stuff just to get it out, power steering lines and all sorts.

I have the metal cutting EZ clip on ones. They'll cut plastic too.

https://www.ebay.co.uk/itm/1-x-195-50-15-1955015-Dunlop-DZ03G-R1-Compound-Road-Car-Track-Tyre/142990734692?hash=item214ae97564:g:zO0AAOSwTVlb1AlF

I've used mine to cut through all sorts. With the right disc they are actually pretty good.

Just looked myself and it appears the R2 medium replaces the R1 which was also a medium. So it should be the same.

R1 in 195 width only and H1 in 205 from what i've seen.

I assumed you were UK based 🙈

EFI is like £180 for a standard map.

Not sure on that number you have, but the later 2010 onwards ones are 543A02310R .

Yeah I've seen his ones now and they don't feel that much different, you can still dig your fingernail in them so they're not that rock hard.

Not him then.

CL10 GAD?

Has to be a wiring issue of some sort yeah. Start with that dodgey cut out wiring.

They're linked to the phones/Amazon accounts that you have set them up with. If you use separate phones for each Echo device, you will be able to play music on each device on its own.