Search results

Harry's Lap Timer or GoPro footage. Booked on for Oulton yeah. Doubt i'll be on the Welsh drive.

No timing on any track days. Everyone does though and it has it's good and bad sides. Mostly people trying to go faster and faster without the progressive build up or experience. I just use it for consistency.

1L usually does it. 1.5L if you want to make sure the old stuff is fully out.

Just get them welded and then give it a quick spray again. It'll be under the seats anyway so you won't see it.

Not the same as the Clio, but my brother's Megane has these welded in for the crotch straps.

Never used them

Use the existing outside lap mounting point with an M10 eyebolt in and for the inside straps and crotch straps get some eyebolt plates welded to the floor.

Front: Brembo HC discs with Carbone Lorraine RC5+ pads Rear: Standard (all that's needed) Fluid: Motul RBF660 or 600 CL RC5+ from Ktec (usually the cheapest) Brembo discs from @George@RTR_Parts on here Fluid from wherever is cheapest.

The xxxD or xxxxD are in your price range.

Something Canon. Need a PhD to understand Nikon menus. I've used all sorts over the years, but Nikon still baffles me.

That's exactly what happened on mine as well.

Where have they been all this time!

2118's come in ET43 only i think. Pro Race 1.2's i'd go for ET38

As long as the dyno correction factors haven't been messed with, then that looks decent!

Purple ish

Still should have put Brembos on these... 😞 These just look like they've been painted with caliper paint from Halfrauds.

Would help if you knew the error codes. Specifically the Renault ones which are DFxxx

That's some gear there.

Driver's side is a lot easier to replace than passenger as you don't have to do the gearbox oil unlike the passenger side.

I'll have a look at it.

I'd say driveshaft.

Just take it off and clean it up and grease it. Mine seized on a track day once when i came to shut the bonnet it wouldn't latch on. Greased it up there and then and it's been fine since.

Cruise control won't work if there's an abs fault. Will be the sensor or abs ring or both (should say which side). Could be a number of things with the EGR valve.

That a paste wax Gally?

AutoGlym HD Wax is surprisingly good for £40.

Any messages like 'check injection' on or anything like that?

Mega bump! But yeah, the new code is 8200768913

You need like a 28in waist to get in the standard size.

Unbolt it from the standard seat and bolt it to the bucket seat sidemount. You'll need to drill a hole/s though.

M10