Search results

Looks like insulation similar to this http://www.carinsulation.co.uk/product/15m2-glassmat-bonnet-car-engine-insulation-sound-deadening

I'm not sure if i'm bored of it, i just want a bit more response from down low really and a bit more torque. I think the cams with the other mods are relatively cheap way to get a little boost and then i can save for a turbo once i have changed the brakes, suspension and a load of other stuff...

Not sure i catch what you mean, unless your saying the Clio needs a charger to keep up with the bike haha. Do you like my cams lol?

Yes Steve, probably faster than the Clio hahaha ;)

Well it should be relatively easy to fit them as far as i'm aware its a straight swap and just have to advance the timing by 8 degrees on one of the cams i think. @NorthloopCup is the man in the know i have been told. Hoping to gain around 10bhp, but more interested in the torque increase. With...

http://www.pure-motorsport.co.uk/details.php?itemid=287&model=7

This morning I woke up early to go and meet @mattsouthall to collect my cams. He was kind enough to meet me on his way to work and we had chat for a bit, thanks! When i get to work I should have my exhaust :)

Your evil..... Anyway more exciting updates, I think i may have lost my mind slightly. Tomorrow I will be picking up some low mileage 197 cams :) and my exhaust will be delivered. Very excited, Chris is going to fit my mounts and exhaust on Saturday. I have since emailed Andy about the cams and...

PMS exhaust.

Me and couple mates use these, great price and has everything you could need really. http://www.halfords.com/technology/car-audio/dab-car-stereos/sony-mex-n6001bd-dab-radio-with-cd-mp3-player-and-bluetooth

The price basically, also as ED had done the belts for it not long ago thought it would be best to ask them, not that I don't trust Chris. I'm excited to see how he gets on doing the exhaust and mounts and as he is close by i will probably use him for more jobs in the future.

I would definitely recommend doing the full kit. The dephaser wears making a noise and might as well change the water pump. Also might aswell do a full aux belt kit because if the aux belt snaps that can take the cambelt with it. The whole job including parts could be anywhere between £500-1k...

No problem, let us know what the outcome is.

Best way to do it is plug in a code reader, they are relatively cheap at £25/30 each, but don't replace them before you have checked the plugs first and plugged it in.

Sounds like injector then.

Ha ha i have already been through your thread so I have seen the links, what did you cut the silicone with? Just i have heard so many great things about EFI, I haven't really heard much about the remapping at ED, but maybe that's worth a shout.

Yer mine has come back but only at certain times/sides I will clean the bulb holder and the electrical connector to see if that does it once and for all. UPDATE TIMEEEEEE Apologies as I am quite excited, I have been ordering a lot of parts recently and trying to organise everything so this...

How much did you pay for the kit? I will a gen one from PMS its £25.

Glad it's finally sorted out, just a tip you should use heat shrink instead of electrical tape to cover the bare wires.

Just read through all of this, great project and great work to do it all yourself! We need some dyno/track videos lol.

You can do, but it its the number i found on his website then i have it lol. I will have to give him a call later.

Just to keep @OssPoop happy ;) I decided to do a headlight restoration today. I ordered the bits i needed during the week (AG Headlamp Resto Kit, Tape and sealer). The lights looked OK from a distance, but were quite poor on closer inspection. First thing i did was grab the de-greaser and...

Bit of a blow this morning :( I have parts arriving at my work and today i received the new power steering pump so I was all excited. I then had a reply to my PM from Mick at Diamond Motors and he said that he wouldn't be able to fit a pump that he didn't supply as the tolerances are so small on...

Just on the way to work this morning and spotted a clean looking AG 200 heading towards London on the M4 about 11AM anyone on here?

If you have a look in my build thread it will tell you all the work I had done.

Aux belt snapped? Have you had a look under the bonnet?

134k on the 182 atm, still going strong :)

I was going to suggest that actually, I have seen a thread recently on it and the guy "tachosoft" had been used before with good reviews plus that's only £20/30

PMS for me then :smile: Will buy the vibration dampers just in case. EDIT: Just realised i have stolen this thread ha, sorry! Back on topic where can you buy the Yanoo from?

Does the PMS rattle a lot like Davyy is saying? I know PMS have those vibration dampers now as extras. Why was the Yanoo your preference?