Search results

It was The Monks brother, oi Monkey????

note the NON 172 front grille!!!!!!!!!!!!!

Try Greman French and Swedish car parts in Edgbaston in Birmingham

So you have just a green filter inside the original airbox??? Reason i ask, is because induction kits and 172 engines dont really mix too well!!!! In other words they normally mess up the fueling causing the engine to run lean = metled pistons

melted piston??? do you have an indution kit K+N or Pipercross etc?????

You need either a small spanner or a pair of mole grips to hold the top spindle of the shaft, then you need one of those spanners with a hold in one end and open at the other (if you know what i mean, both ends the same size) and i "think" the size you need is 17mm remember left lose, right...

yeah, im just gonna bend it out of the way up into the arch with a big hammer!!! You could buy an angle grinder for £50 and do it yourself!!!!

Im doing it myself with a heat gun and a big rubber mallet!!!!! BTW R-tec charge about £90 to roll to arches

when you say spots, do you mean fogs lights or main beam??? If youve bought the 172 headlights you also need a box of tricks to power em up i think

what size are the ones you are wanting to but??? 7x17s????? The offsets differ between std clios and 172s, but my wheels were originally on a 172!! 17inch wheels on a 172 IMO need to be ET37 to ET40

Piss Myself Laughing LMAO = Laugh My Ass Off Well thats what i translate them too!!!!

Rhys im coming up to Sheffield soon (might be going to uni there) ill gladly sort them out no probs!!!!

noisily!!!! it scrapes going up on to it and comming off it!!!!

yeah you can, you can get a conversion kit that you have to fit inside your PS2 for £68, but i found you get tons of interferrence using a normal plug type inverter, so i had to get a special one (£130!!!! but its got low battery warning and safety cut offs)

2days Gaz???? how many fag and tea breaks did you have????????;)

I wrote off my first clio X822 MOF (1.4 8v sport 2001) and the insurance company sold it, and some guy re built it!!! (i rolled it) Its back on the road!!!

I paid £50 for a new wheel bearing (was quoted £38 inc VAT on the phone to them about 1 hour earlier!!!!!!)

monkey, dont buy it off Renault, thats almost as bad as going to Halfords, theyll rip you off!!!! Mail order is SO much cheaper. Renault can only just about build cars, god knows how theyll fit a stereo!!!!

If you want to be ripped off then by all means go to Halfords!!! £35 for a 10min job!!!!! Seriously its a piece of piss to fit!!! As for the stalk adapter wire, you do need to take the top of the dash off, but it aint that hard!! I do A level ICT and aint got a clue about how to built a...

did you ring up about that Roamer???

b****cks missed it!!!!! any good??

its acutally nearer to a 1.1, its 1149cc for the clio!!! 206 and 106 quicksilvers havent given me any trouble, there fairly quick though so be careful!!!!

Do you think theyll do one for the AVH 6400R??? (Tv headunit)

Nope, its a brilliant job, and im a fussy bugger!!!! You cant tell the palstic was ever textured, perfect colour match!!

OMP do a rear strut brace as well as K-tec, but i read somewhere that it squeaks like hell, im guessing thats why the K-tec one has rubber bushes

Yes sir!!!!!

on an RT yes, i would think so. maff have a look on http://www.k-tecracing.comwww.k-tecracing.com they have a centre exit that needs no modification to fit

na mate, thats a rip off, the body shop i mentioned above charged me £440 and that was including a new front bumper + spraying, fully colour coded (front and rear bumpers + side stirps + handles) and tthey sorted out my tracking!! £600???? rip off

Roamer does all my photography work, cos i cant get my damn digi cam to hook up to my pc!!!!

its only for the time being mike, its still got another 40mm to go at the front and about 15 to 20mm at the back!!!!!!!:devilish: