Search results

Re: 'Cub's Trackday Flamer - Cage etc' You or the car? TMR!! Lol

Interesting about the uprights! I'm sure something could be manufactured. I might have a look for a set of 133 uprights. Lol! You could convert to the 1*2 style hub and use the custom ball joints I use on the roll centre corrector hubs to gain track width.

I've got the bearing kit - great bit of kit! Stiffening kit will be put on eventually.

You will definitely see an improvement from the ast's mate. Diffs ain't so bad if you know where to go. ;) YHPM

The beams are also chocolate and do flex/deflect. The pure motorsport stiffening kit will reduce that a good amount and in theory, your geo should remain consistent.

So is it road use and autosolos? Or something else? Your biggest improvements will come from correct suspension geo and a diff tbh mate.

Gripper? Do you want a different cw&p?

Yes mate it is, but the toe change is more noticeable than the camber change.

Yeah you should be alright then tbh as movement is not so much with those spring rates. Mines quite a bit lower than yours as well, but I have the front roll centres corrected so I can get away with it.

When you lower the rear the angle that the beam sits at is altered, so if the beam is machined with the camber and toe in mind for a set ride height it changes. Not dramatically, but it definitely changes.

Chassis legs mate - not subframe. You've got to be very very low at the front though. Mine was doing it one year when I was at the nurburgring. Whats your Ast spring rates? My kw's that were fitted were 60n, so about 335lbs. Too soft by a country mile for track work.

The wiring/component would set on fire before that popped tbh mate. I'd go with a 200/250A mega fuse personally. That's what I use in mine and never had an issue.

The front roll centres are the ones to focus on tbh as that's where the biggest gains in handling improvements come from. The extender pins like the vw/Audi boys use aren't especially good when combined with Clio hubs. They elongate the bottom hole on standard ball joints, so you just increase...

I'd imagine they will be very close to the legs mate, and if the springs are reasonably soft on the B14's it will deffo catch under hard cornering.

It's more toe and camber changes that are the result of lowering the rear.

Looks well that! Do the driveshafts hit the chassis leg on track? Ok mate, no problem.

In a perfect world the wishbones need to be sloping down from the subframe to where they locate in the bottom of the hub, as in centreline of the securing bolt to the centreline of the bottom ball joint pivot. You can run them parallel with the ground though. Is your car as low as it is in your...

You need to be a member to see the group buy section mate. There will be about her gb around late March/early April.

You can go 30-40mm lower immediately with these fitted.

You'd just have to buy another adapter plate from gripper mate. Easy.

Well you will leave yourself open for the smart arse comments! Flol! Tbh, the resetting of them doesn't bother me anyway. I've done it that many times I know how much to move the track rods to get very close to the desired setting. I also have a string setup that hangs off the car. That's the...

Yes mate optical ones. They work very well on all the lowered cars I've done with mine mate. Never had an issue transporting them either! Lets not forget they have the conversion table on them as well - ideal if your s**t at maths! Flol!

Or dunlop gauges! ;)

And this is the very reason why I'll never bother with it!

Doubtful as you need to test it on the same day, same track, same conditions, same consistency of driving style, etc etc.

Addressed! ;)

Lol you took your time!! Dan changed his before mine!

There will be improvements from having something like this fitted as it reduces the amount of air flowing under the car generating lift. For it to be really effective though, it needs to fit as close as possible to the wheels (obviously allowing cut outs for full lock) and ideally be coupled to...

Get booked in on this Jacob The Russian.! I'll be there in my cup as well, so we can see how much of a nervous passenger you really are! Lol!;)

Jam sport do a supercharger kit for them too.