Search results

Morning guys, I have a 182 and having a starting issue. When i try to start it it turns over for 5-10 seconds then stops and doesn't start. Have had jump leads attached incase it was lack of power but same thing. Could it be starter? Regards

Guys, long story short I need a PH1 172 Registration number to order some parts has anyone got a reg I can use? Regards

Guys, looking for a rolling road remap near Epsom KT17 area anyone know of any decent ones around here.

guys, blown up my Clio... not sure how, still looking into it. but nether the less need a new engine. Is there any differences between the 172 and 182 engines? Regards

Guys, fitting the rear bias valve to my 182 to remove the ABS. The "leaver bar" on the back that is connected to the spring doesn't seem to have a place to bolt to. am i missing a bracket? Regards

Guys The abs light is on in my clio track car. I haven't had a chance to plug it in yet but if the abs light comes on does this then put the brakes into 50/50 distribution and how would this effect the the clio?

Morning, Going to be looking to go somewhere to get my clio corner weighting and geo set up. i live in sutton surrey was thinking of going mark fish as nothing but good things to say or hear about them. but wasn't sure if there was anywhere a little closer to me at all that anyone can...

Afternoon, So in my wisdom of stripping my clio i cut the cable to the rain sensor and lost the end with the plug on it. What effect does it actually have to the wipers? And could it be whats causing the SERV light to be on as no fault codes on Rstuner? Regards

SO..... looking into buying a few enhancments over the next couple of month but so may of them seem to be so good! Dont know if anyone can help with laymen terms of what they actualy do and "are they worth it". the clio will be a track only car maybe drive to local circuits but thats all...

Guys, Just put new disks on but they wobble like the bearing has gone excessively. Could this be because the washer is missing i cant remember seeing one when i took it off and have checked the old disks? Also are all rear hubs on the 1*2s the same? Regards

Guys, Got a 182 track car and for various reasons want to remove the ABS and traction control. for abs is it as simple as a 172 cup master cylinder and running new brake lines with bias valve? Traction control perminate removal?

Guys Stripped the car and removed all seats etc.... Can the yaw sensor be repositioned so don't have to have random cables?

Guys, long story short .. brought a accident damaged Clio 182 PH2 had to replace front and rear sub-frame. turning I into track car so have replaced suspension for Bilstein B14s and fitted PMS solid top mounts and Strut brace But and I haven't got tracking done yet as cant use the car on...

Is there a way to make the airbag module think there is a disable passenger airbag switch and it be enabled where the car doesn't actually have one? I have the RStuner with airbag module but cant clear this last code as it sees that the disable passenger airbag switch is disable but my car...

Morning, Am trying to turn disable the airbag lights on my 182 with the RStuner but i cant do two last ones: DTC9044 ignition (trigger) line configuration And DTC9034 restraint system passenger airbag disable indicator Can anyone let me know what these are so i can re connect or add...

Hi, so I had a car that was written off after and bad accident, had to replace front and rear subframes. Fitted braided brake lines and out Super Blue fluid through them and pressure bled them but the pedal is still soft and doesn't build pressure when pump. I have got two ABD trouble codes...

Guys got a RSTuner with air bag module but it wont let me de-activate or re-lock the Airbag ECU. Could it be because an air bag has deployed and therefore wont do it? Thanks

Morning, Got the full cage and have got on well fitting it until the very rear feet. have drilled the holes for the captive nuts but when the cage is together there is a 1-2cm gap at the bottom between the plate and the wheel arch. is this normal? are we meant to just "fill" with weld or...

Guys im guessing this is to do with airbags but what actually is this part?

Guys, Anyone got experience with bimarco seats. Im looking for a reasonable quality and comfy seat but wont be used day to day. These seem cheaper and are FIA?

These any good? want to add camber and want solid top mounts. so are these the best option?

Guys, using the 172 alternator and bracket with keeping the PAS what size belt do I need?

Guys stripping the car, found this box im guessing my looking at wires may be alarm related?

Hi guys, I have a clio 182 PH2, I know there are multiple threads on this but none seem definite. Im not fussed about keeping PAS either. I have seen threads using Volvo parts or cossie parts, can anyone give a list of what parts are required for what kits? i know there are the PMS kits...

Hi, Guys the fuel line under the car that i brought has split, guess they bottomed out was accident damaged when i brought it. should i just add a section in, if so what size is the fuel line? or should i replace the whole line? Thanks

Guys does anyone know how to remove the bolts? To remove the beam? From underneath they just spin and on top is just a circular disk?

Hi, just to confirm I have a Clio 182 54MM spacing is this the correct product number: Product Num: 47-087750 http://www.ppcgb.com/products/bilstein-b14-pss-coilover-kit-47-087750?gclid=CL_yiMyct7wCFQsCwwod_XgA3Q

So I was looking for a weld in cage but the only group buy for weld in seems to be going no where. how much safer / required in race regulations not that im planning to race but you never know is a weld in over bolt in? If I wanted it to be road legal I.E get an MOT can I have cross door...

Guys, Have taken the dash out and now have a metal frame work can this also be removed or is this structural? It will be having a full cage fitted.