Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hi guys,
when starting my car (cold starts) if I hold the revs at 1k rpm or
below it sounds like it's misfiring?? Is this normal due to there lumpy engines or should I be worried?
thanks
Hi guys,
when I owned my last 182 BTM was selling yozza exhausts.
are they selling them as can't find them on here or when I search on google! Or can you only get them 2nd hand??
Also my friend told me there is a type 1 and 2 of the yozza for the 182 is this correct
thanks for your time
Josh
Sorry guys, had a search couldn't find the answer (but I am on my phone)
my cat is shot on my 182 and thinking of replacing with a decat.
Q1. Can this put my car in limp mode?
Q2. If it does is there anything I can or do I need a remap?
Sorry I'm sure the answer is here I just can't find it...
As above, looking forward to the show n meeting a few guys!
I would post a pic but no clio, selling my vxr Saturday after the show, then the hunt begins for a rb 182
lets ta see your prep for FSC
Have had a little search and couldn't find anything??
Looking at buying a rb in the next few weeks :)
Plans are 2118's in dark grey? But looking at a rb ff with the stripes and was thinking I may put the white 2118's on to match the stripes?
Anyone got any pics?
cheers Josh
When I put my foot down in my 182, at about 3-3.5k upwards my engine (well think its my engine) there is sort of vibration n higher the rev range the more high pitch it goes??
What could this be??
Thinkin off ringin 519 automotive or Fred to give them a blast to see what they say...
Do I get a new one on pcp?
Or should I just get one second hand with about 25,000-30,000 miles??
Probs going to trade my rb 182 as can't be bothered to go about selling it :(
Just want abit of advice really looking at gettin a storm grey or rb 200 :)
Maybe someone point me in the...
Just realised my front fogs don't work,
Don't think they have since IV owned the car :s
Just the bulbs or could it be linked to somthing else, had a cambelt changed last month with bumper off could this be the reason??
Cheers guys
Hey guys,
My 182 make a funny noise when ever I go over a drain,bump etc... It almost sounds like the cars got change in its back pocket :s
The noise sounds like its coming from rear driver side??
IV recently fitted an rs192 but try wiggling that around n it doesn't budge???
Also I...
I have a spare set of 172 alloys (non turinis) in 16" can some one photoshop them on to my car please ?
http://i.imgur.com/YnhWEl.jpg
Don't worry only for winter ;)
I have a Decat sat around so thought I might fit it,
I was just going to bung up the second lamba Hole n leave lamba hanging over heat shield??
But was wondering isit worth replacing the front lamba as IV heard if you have a bad reading front lamba it can put your car into limp mode...
Don't have any tools axle stands etc..... :(
Is there any garages in the wiltshire that will feet my rs192 for me?? Alot of garages say coz I didn't get it through them they won't fit it :s
Thanks for any help guys :)
Josh
Hey guys,
Quick question, if I bung the Decat and then sleeve the lamba will the light still come on n will it ever jump into limp mode??
as I may by them of kam racing as they cheap??
If not I Probz won't Decat my car as I don't won't any problems :(
Cheers for any help??
Josh
My exhaust is shot :(
Hopefully getting rs192 or yozza cat back system but my cat is shot to, where can I get a cat from can't seem to find any??
Thanks in advance josh
As above??
Done really want the hassle of buy rs tuner using it once then selling It on :(
U was able to drive to jms n they would do it for £200 but they shut now
Where else can I get it done?
Cheers
Alright guys, had a quick search can't seem to find any pics :s
Was hoping of getting 15" alloys with profile 50, my car has been lowered 40mm on apex springs :)
Has any one got this setup or a pic of this ^^
Thanks Josh
Hey guys,
I have a whistle coming from engine but when I put the clutch pedal down the noise stops soo have been advised to get a new clutch and bearing :s
But where should I get it done??
N how much am I looking out?
Thanks for any help or tips
Cheers Josh
I need a lift from Swindon to Middlesex (jms)
77miles about 1 hour 10 mins
My cambelt snapped so no power :(
Will pay cash :)
For Tuesday 23rd :)
Please pm or text me 07876347450
Thanks Josh
Hi guys,
Thinking of getting a 172 or 182 for a track/road car :)
Wanted some inspiration on looks
I realise you don't won't a track car for looks but as this is going to be a road car aswell I was thinking of trying to make it look mean like matt black paint, bonnet catches, nice...
Was driving to my gf 's house, was goin 40 in 5th then warninglight n no power straight into the bus lane with my tail between my legs :( called aa he tried to start it n said straight away " I know what that is, cambelt" :(
So got towed to the renault garage down the road they was shut so...
I need help fitting my front springs in Swindon??
I don't have a 21mm socket need 2 :(
Axcel stands
Allen keys
Or compressors
Was hoping someone local could help me?? Some who has done it before would be a bonus and if you. Could bring the above it would be great :)
Willing to...
Can you jet wash inside your engine bay?
My mate does it all the time n says's it's fine but I'm not sure lol
Can I?? Or should I not my bay has soo much crap in there, I will wash it proberly after just want to get the build up of crap off first
Thanks or any help
Alright guys
Need pointing in the right direction do I spray my cup wheels gloss balck or buy turinis??
Stuck in two minds
Any views on this would be great thanks :)
Cheers Josh
Was searching around and just want to confirm if I get 172 cup turinis I understand they won't rub?? But when lowering it will rub?? How low can you go before it starts to rub?? As I want 40mm lowering springs :) cheers for any help
Thanks Josh
Quick question searched it but no luck :(
Does a Bmc induction kit fit straight on to the standard elbow or do I need a samco??
Thanks in advance :)
Josh
What shall I spend it on?? Not including coilovers or exhaust as I already have them on order :)
So what shall I spend the money on?? Abit of carbon fiber, bullets, mirrors??
Let me know what you think i should do,
I know it's my car, I'm sure your thinking do what you want as its...