Search results

SOLVED Steering hub Compatibility Mk1 Ph3 Clio Hi Just a quick update for anyone who is searching the forums for the correct steering boss kit for the Mk1 Ph3 1.2 Clio rl (no airbag) OMP part no. 1960RE113. It is listed as a Mk2 Ph1 steering hub kit

Hi, I have searched the forum for an answer to this, but can't seem to find what i'm after. I have a 3 door, mk 1, phase 3, 1998 Clio 1.2 'Biarritz', and am trying to find a steering hub (boss) to fit an aftermarket wheel. The aftermarket wheel is a standard 70mm pitch jobbie. My problem is...

i had a look this afternoon, and there is no bodywork/speaker mounts at all behind the cards, just a giant void. which brings me to a new question - if i brace it with MDF rings from behind, can i mount speakers straight onto the plastic trim? or will it sound pants and rattle like crazy?...

hi guys, my clio is a ph 3 1998 mk1 1.2 'biarritz' i have a pair of 8" drivers in a sub box in my boot, and a pair of hertz 4" dash mount speakers. i have a spare couple of channels from my amp and would like to instal some 5 or 6 " speakers in the rear passenger area. I don't want to mount...

Thanks for all your advise. i replaced the negative terminal clamp (the collar with teeth that grips the battery under the plastic cap) as several of the gripping teeth had broken off. since i had everything out and was working on the car, I also patched in a new 8AWG ground cable to the stereo...

UPDATE The stereo is now turning itself off and on again after only a few minutes use. I have ruled out any issues with the amp or the speaker wiring harness (by isolating them and the issue still occurs). My headlights are now flickering, but my battery is still reading 12.6v when the engine...

Thanks james, do you mean a 12v source that is seperate from the car? I have run a multi meter from the positive terminal of the battery to the ground wire on the HU, and it reads the same as when i run it straight to the ground terminal on the battery (12.6). is it worth checking from an...

Hi everyone, this is my first post. I have a MK1 1.2rl and have recently fitted a new Alpine X311 head unit, with Hertz DCX100 4" coax fronts (running direct from H/U), and twin 8" drivers running from a mosfet mx4400 amp (thats all the info i can get from looking at the amp - it was a hand me...