Search results

It isnt the ball joints iv changed ball joints new poly wishbone bushes and arb bushes and mine still does it only thing i havnt changed is top mounts so it must be them doing it

And no its the new kit with the rear coilover unit

Yes the rubber is the right way up and i dont mean nut i mean the bit at the top of the shock to hold the piston rod while tightening it upjust wondering if the old 1 looks like it has more thread were the allen key goes inside the top of the piston rod on standard and on the spax there is a ten...

Any1 got the spax and know how much thread is left if any iv already done everything u said dan before i posted the thread but it might just be me were the old 1 had a allen key inner and the spax have a nut on top so to speak

Ok have u fitted them before if the nuts fully done up but only abouta mm of thread showing is that ok ?

Will the nut that holds the spring diwn wind on more of i loosen the shock off cause i had to push the spring down when fitting the spring nut and then wound it down till tight

I havnt fitted the spacer they supplied all i fitted was the sping cap the top mount bearing and the rubber off old shock with the insert spacer that it has in it cause the 1 spax send hasnt got a lip on it to sit in the top rubber so i just used the old 1 the only spacer i have used is a washer...

As above iv just fitted sum spax rsx coilovers to my clio 182 and there is only about 1 mm of thred sticking out the top nut but when i try putting the knocking fix spacer to stop it knocking there isnt enough thread left the blue loctite bit of the thread touches the top of thread and looks...