Dension Ice Link FM Help???

[Liambo-235]

Currently got this from a mate, not too sure what i need to complete it, i thought i might have just needed the little connector to go into the back of the stereo? Been onto the Dension web page.. Got slightly confused.

The above image is where i thought i would need to connect the connector for the stereo?

Sorry about quality i'm at work and can't find the camera so using my HTs**t.

 

[Floridadaz]

This looks like it sits in line with the aerial connector and produces the ipod on the head unit like a fm transmitter only hard wired. The loose cables may just be for power.

 

[Liambo-235]

An idea's mate? I'v PM'd you about it

 

[Floridadaz]

Yeah saw that, The BLACK is ground, RED 12V (permanent), PURPLE 12v (switched ACC) according to the denison web site, you will just need to connect these up at suitable points.

 

[Liambo-235]

Yeah but what do they go into? Any images links, iv tried searching but got very confused. Also see image 3 and 4 do they plug into each other? :S

 

[Topgeartom]

Exactly what has been said really.

The dension kits work by transmitting onto an FM frequency like the cheap ones do, however the dension wires directly into the aeriel input on the back of your head unit - it just sits inbetween the aerial input and the head unit itself.

From memory the red wire (live) needs to get spliced into the red wire on your loom, the black (ground) to the black wire on the loom, and the purple into the yellow (switched live) - but as i say thats all from memory so im not too sure.

 

[Liambo-235]

Thanks people! Just cleared everything up a bit more!