Fancyplates... Am I being a tard?

[Harpham]

Want to order a 3/4 front plate, but I it seems that you have to order both front and back plate together.

Is there a way to just order the 1 front plate as I had a new rear one done about 2 week ago!

Or is it just me being a r****d??

 

[jobac]

You can do this I bought just a 3/4 front plate a while back..

 

[muld]

Top drop down box on the page with the measurements (Step 2)
Set of plates
Front Only
Back Only

 

[TimR26]

In answer to your question.....Yes!

 

[richy22]

doh!

Its on page 2 after you have put in your reg as described above

 

[Harpham]

Oh dear... I am a proper tard!!

Will order one tomorrow

 

[bedford8256]

i want 1 of these, but they dont accept paypal. and my card detaisl never work online

 

[daveski]

What are the chances of being pulled with a 3/4 plate?

 

[john182rs]

What are the chances of being pulled with a 3/4 plate?

Depends on the copper

 

[davo172]

Anyone got there std size plain rear plate to match the front 3/4 ?

Does it have there postcode and id on it ? Anyone got any pics ?

 

[Harpham]

What are the chances of being pulled with a 3/4 plate?

Notts police will love it tbh... Probably rape me when they see it

 

[john182rs]

Notts police will love it tbh... Probably rape me when they see it

I dont know but i think if you put the standard plate in the boot so if or when your pulled you could say that you forgot to put the proper one back on.

 

[Harpham]

I dont know but i think if you put the standard plate in the boot so if or when your pulled you could say that you forgot to put the proper one back on.

Thats the plan... Velco it on!

Hopefully I wont get a copper that is on his period, like I have done before, if I get pulled!:rasp:

 

[Vish]

Why not just get a shorter height plate to fill the recess instead of 3/4? Much harder to notice it's not full size IMO, and much less noticeable than 3/4. Or do you specifically want a shorter width plate?

 

[Harpham]

Why not just get a shorter height plate to fill the recess instead of 3/4? Much harder to notice it's not full size IMO, and much less noticeable than 3/4. Or do you specifically want a shorter width plate?

Im getting the shorter height one... The 520mm x 84mm.

 

[daveski]

Post some pics when you get yours Harpham and i'll make a decision then. Can't be bothered with the hassle of being pulled

 

[Will.]

Why dont you just cut the plate to fit the recess.

 

[Vish]

Im getting the shorter height one... The 520mm x 84mm.

I think you'll be ok with the police then. I'd be very suprised if they noticed that TBH, esp if font is legal and all spaced correctly.

Unless the police are really anal around your area.

 

[Neat]

In case you're interested, cause I don't think most realise, you can change far more than just the height of the plate. You can basically design it as you want.

I posted this extra info. to try and help people out - http://www.cliosport.net/forum/showthread.php?t=496534

 

[davo172]

In case you're interested, cause I don't think most realise, you can change far more than just the height of the plate. You can basically design it as you want.

I posted this extra info. to try and help people out - http://www.cliosport.net/forum/showthread.php?t=496534

Got any more pics of yours mate and the std rear plate ?

 

[Harpham]

I think you'll be ok with the police then. I'd be very suprised if they noticed that TBH, esp if font is legal and all spaced correctly.

Unless the police are really anal around your area.

Notts Police love "Boy Racers" (basically any young lad with a car )

Either way, just ordered the plate