ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Flashing EML



Sj1782

ClioSport Club Member
  Audi s3 8p
Saturday I fitted new spark plugs, coil pack, leads and injectors to cure a misfire, before the misfire I had a flashing eml light every now and then, it's flashes again today since fitting all the new parts on Saturday, could this be now a Lamda sensor?
 

Sj1782

ClioSport Club Member
  Audi s3 8p
I've tired but it dosent find anything as it flashes for a few secs and dosent stay on, so obd dosent find anything :/
 

Typhoon

Gangsta
ClioSport Moderator
CLiP will store it. A few members here have one but depends where you are.

Is it still misfiring now?
 

Sj1782

ClioSport Club Member
  Audi s3 8p
I'm located in Leeds, drives perfectly fine no loss of power, just started flashing for maybe 30secs then went off,
 

Typhoon

Gangsta
ClioSport Moderator
I'm located in Leeds, drives perfectly fine no loss of power, just started flashing for maybe 30secs then went off,
Has it only flashed the once? If so, I'd ignore it for now. It could just be a bit of a glitch that's ironed itself out now.
 

Sj1782

ClioSport Club Member
  Audi s3 8p
It's only flashed just the once since I replaced the parts on Saturday, before nothing was changed it flashed maybe 3 times in space of 2 weeks
 

GrahamS

ClioSport Club Member
  335d
That sounds like an injector which would be most strange. No fault code until the light is on permanently.
 

Sj1782

ClioSport Club Member
  Audi s3 8p
I've just replaced 4 injectors with a spare set that have covered 20k miles :(
 

GrahamS

ClioSport Club Member
  335d
I've just replaced 4 injectors with a spare set that have covered 20k miles 😧
Ah I thought they were new. Have you tested the resistance on them? They should be 14.5 ohms. It does sound injector related to me. I've never heard of a flashing EML not being that.
 


Top