Hardware to install Jon Foz Subframes

[Unlucky-Racing]

Morningggg

Before I order up a load of random hardware, does anyone remember or know off the top of their head what hardware is required? Could go and roughly work it out but easier if anyone can share their experience.

 

[Gus]

@JON FOZ might know

 

[Clio_fool]

Shame he can't throw a few bolts in with those very expensive frames 🙄.

 

[Mr Trailer Man]

High tensile M8 bolts 10.9 or 12.9 grade around 40mm long to bolt the frames to the car.

I used 25mm long 12.9 grade M8 cap head bolts to attach the side mounts to the frames.

You could use M10 if you opened the holes up.

 

[loggyboy]

8.8 is fine for seats and belts - at least MSUK regs think so.

 

[Krarl]

Mines got 8.8

They're sound. I believe they're M8x1.5, I used the original cup nuts underneath the car and like James said, just get 40mm and then worst case you have to cut them

 

[Mr Trailer Man]

Yeah 8.8 is sound but if you can get higher then may as well.

 

[Unlucky-Racing]

Thank you chaps