How to connect silicone tubing

[clio1.4lsm]

I wanted to know how you would connect these hoses http://ramair-filters.co.uk/bends-90-degree-silicone/red-90-degree-silicone-bends.html are they expanded at the ends? thanks

 

[domjolly]

http://www.demon-tweeks.co.uk/performance/hose-joiners/samco-alloy-hose-joiner
or
http://www.demon-tweeks.co.uk/performance/hose-joiners/samco-billet-alloy-hose-joiner


and 2 of these
http://en.m.wikipedia.org/wiki/Jubilee_Clip

Job done

 

[domjolly]

It will have an internal bore. Which you then match with the same size joiner (usually measured in outer diameter) samco hosing will fit snug and stretch over joiner

 

[clio1.4lsm]

Cheers

 

[clio1.4lsm]

So with these ones http://www.demon-tweeks.co.uk/performance/hose-joiners/samco-alloy-hose-joiner what size would I need for 60mm tubing they only have 57mm or 63mm

 

[domjolly]

You need to find one that is 60mm they have them on eBay

 

[domjolly]

What car is it for?

 

[clio1.4lsm]

Clio 55 plate 1.4 16v

 

[domjolly]

Yeah just find a 60mm joiner on eBay

 

[ben lee]

http://www.ebay.co.uk/itm/2-3-8-Sta...638?pt=LH_DefaultDomain_3&hash=item3380f540be

straight pipe cut to length then two 90 deg bends induction filter and 2 small breather filters to make your own kit up.

 

[clio1.4lsm]

Where would I put the breather filters?

 

[ben lee]

one on the idle valve and one on the engine breather under the throttle body.

 

[clio1.4lsm]

Ok cheers