How to remove front fogs on a 1*2?

[T26TGT]

As above, please help

thanks tom:evil:

 

[Jay Payne]

From behind, iirc 3x T20 Torx screws.

 

[Henry]

they're easy to get off - loosen the undertray along the bottom of bumper, unbolt lamps

 

[T26TGT]

really that easy.

I am leaving them out for that cup racer look. what should i do with the bracket and the wires etc.

 

[blackmagic]

I am leaving them out for that cup racer look. what should i do with the bracket and the wires etc.

sell them :rasp:

 

[T26TGT]

I meant do u take the bracket and the wiring out?

 

[Henry]

have a look when you get there - they bolt straight to mouldings in the back of the bumper (no brackets). i think the fog loom disconnects from somewhere, so could remove it

 

[kevinhall]

I took the wheels off, arch liners out to get at them from the rear. Just 2 torx bolts holding them in. IIRC they have a separate plug which is clipped into the bumper so unplugged the lamp, removed it and left all the wiring where it was.

 

[clio_luke]

do your rear fogs work with the fronts disconnected?

 

[Munson]

Arch liners out. Fogs out. Jam the wiring up somewhere where it won't fall out. Done.

 

[MarcoRS1]

do your rear fogs work with the fronts disconnected?

yes they work:approve:

 

[chrispy.clio]

I wipped mine out when my bumper was off. I think you can only take the wiring out when the bumper is off.