Indicators dont self cancel

[Feates172]

Always been like this since i owned the car. Have only just got round to this issue on my list. Last problem too.

Its a ph2, but has a ph1 stalk as it has a sabelt wheel.

Any ideas? Has it been wired in wrong? Something faulty or is it just normal for a ph1 stalk on a ph2?

 

[withoutabix]

have a look here dude, will be the Squib which has been knocked during installation of your sabelt wheel

http://www.cliosport.net/forum/showthread.php?681806-boss-and-wheel-change&highlight=window

 

[182_Adam]

you need the self cancel tag/panel from the ph2 stalk as it's slightly longer. I had same issue did this and it worked a treat.

 

[Feates172]

Cheers,

Id have no idea what would looked right or wrong. As ive nothing to compare too. I did read about a canceling ring being missing or not aligned. But no idea what that looks like either.

 

[182_Adam]

i wouldn't say its the ring, im almost certain it's the tag issue. if you take the ph1 stalk off, on the front of is is a small panel held on with 2 torx screws, it needs taking off and replaced with the same part from the ph2 stalk.

 

[Feates172]

Easy to do?

Any chance of a step by step guide? be a star if you could

 

[182_Adam]

very. follow this to get the ph1 stalk off
http://www.cliosport.net/forum/show...ng-wheel-all-stalks-steering-casing-and-squib

then you'll be left with this.

remove the two screws and prize (be careful) the panel off. do the same on the ph2 stalk and swap over and do everything in reverse.

 

[Feates172]

Nice one. So i do all this and swap over the panels as pictured in your last pic? From the ph2 stalk to the ph1?

Sounds too easy lol.

Cheers for your help. Now to get hold of a ph2 wiper stalk.

 

[182_Adam]

yes mate, i changed to an aftermarket wheel and had the same issue. went out and bought other stalks, which also didnt work, then i changed that plate and it worked lovely.

 

[Feates172]

Your a legend. Cheers.