ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

No Glove Box Light



  Liquid Yellow R27
I have a 1.4 Clio Dynamique Mk2 Ph2 (I think it's a ph2 anyway but could be wrong). The glove box has no light in it but it has a gap for where it should be. There is also some wires from around the back, picture below.

imagewmg.jpg

I have tried taking out the light from the boot and plugging that into the bigger cable shown in the picture. I've put the engine and headlights on but it's not lighting up. Is the boot light completely different? What are teh other two little cables for in the picture? Also, where should the switch be to tell the light when the glove box is open / closed?

Any help would be appreciate, thanks in advance :)
 
  Liquid Yellow R27
Anyone? A picture of the back of your glove box light / the switch would also be helpful if anyone could snap one for me.
 
Not really looked into it that much as mine works ;)

But the boot light should be the same and if that isn't working it leads me to wonder why was there no holder in there in the first place?

Maybe the wiring is shot, whip the dash off and follow it back
 
  Liquid Yellow R27
Not really looked into it that much as mine works ;)

But the boot light should be the same and if that isn't working it leads me to wonder why was there no holder in there in the first place?

Maybe the wiring is shot, whip the dash off and follow it back

It's probably a bit to technical for the likes of me haha. Will have a look at my mates one when I next see him. :)
 
  PH1 172, E39
I have a 1.4 Clio Dynamique Mk2 Ph2 (I think it's a ph2 anyway but could be wrong). The glove box has no light in it but it has a gap for where it should be. There is also some wires from around the back, picture below.

View attachment 57070

I have tried taking out the light from the boot and plugging that into the bigger cable shown in the picture. I've put the engine and headlights on but it's not lighting up. Is the boot light completely different? What are teh other two little cables for in the picture? Also, where should the switch be to tell the light when the glove box is open / closed?

Any help would be appreciate, thanks in advance :)



I was now looking at this on my car. Same wires I encountered. The light seems not to be getting power. I wonder whats the the two smaller connectors are for?
 


Top