OBD2 information displays Clio 182

[MattJackson82]

Is anyone using a display plugged into the OBD port on a 182 to provide information? Speed, rpm, various temps etc, I think this would be a nice touch on a track car, I’ve seen one gentleman had a Lufi X1, anyone know if these actually work & how much information is provided from the ECU?

Thank you

 

[mariolo]

Is anyone using a display plugged into the OBD port on a 182 to provide information? Speed, rpm, various temps etc, I think this would be a nice touch on a track car, I’ve seen one gentleman had a Lufi X1, anyone know if these actually work & how much information is provided from the ECU?

Thank you

I am interested in this topic. I currently have the scangauge 2, and it works quite well for some values (it does not measure oil pressure or oil temperature...). Allows you to view logged errors and delete them.

I'm interested in the latest lufy Xs which seems to work quite well. But I don't know of any options from anyone who has used it in a Clio.

 

[MattJackson82]

Hi
I ended up purchasing a Lufi XS in January for my 182 track car, I find it works very well & is simple to use.

 

[mariolo]

I bought it but it hasn't arrived yet. Does it show the oil temperature? Have you added any parameters by PID?

It turns on and off with the car ignition without a problem, right?

 

[Brigsy]

No oil temp sensor on 182 as standard. Regarding temp, all you can view on obd is coolant and air intake temp.

 

[Neil Clio 182]

I've just started playing with racecrono, testing on the TT as the CLio is waiting for its new clutch.

 

[mariolo]

I tested today the OBD LufiXS Display, but it has given me some very strange ERROR on dashboard, as soon as I put it on and start it gives me 3 errors, the "SERV" warning, the ABS/traction control warning light and the engine failure warning light.

I've tried turning it off and starting it a couple of times and they wouldn't go away. I have disconnected it and put on Scangauge2, which is the OBD display that I used until now and the "SERV" and ABS errors have been removed, and when I review the registered errors I get P0500 (and I have deleted it)

Anyone else has happened?