REAR NUMBER PLATE LIGHT

[clio kid]

CAN ANYONE HELP ME WITH THIS MY REAR NUMBER PLATE LIGHT DOESNT WORK I HAVE CHANGED MY BULB AND IT HASNT FIXED IT WHAT ELSE CAN I DO

 

[Lucaio]

HOW ABOUT TURN OFF CAPS LOCK? UNLESS YOU'RE ONE OF THOSE PEOPLE THAT LIKE TO SHOUT A LOT.

 

[Nickson]

HOW ABOUT TURN OFF CAPS LOCK? UNLESS YOU'RE ONE OF THOSE PEOPLE THAT LIKE TO SHOUT A LOT.

Aside from the above.
Checked the fuses?

 

[fixedgear]

HOW ABOUT TURN OFF CAPS LOCK?

LOLZ^^^^^^^^

I had the same problem. It's a problem within your holder/connector. Give them a good blast with contact cleaner and scrub them up.

(check for 12v first)

 

[Blacky950]

if you have an LED bulb in, change it around then try it or try the above

 

[TheEvilGiraffe]

Pull the holder out.. it's a sh*tty French style design, totally open to the elements. Would bet that the contacts are corroded (copper/greeny colour now) and that's not making a circuit any more.

Probably need a new holder, or worst case you'll need to re-wire the connection from the loom to the connector on the holder.

 

[TheEvilGiraffe]

Pull the holder out.. it's a sh*tty French style design, totally open to the elements. Would bet that the contacts are corroded (copper/greeny colour now) and that's not making a circuit any more.

Probably need a new holder, or worst case you'll need to re-wire the connection from the loom to the connector on the holder.

 

[lee182RS]

LOLZ^^^^^^^^

I had the same problem. It's a problem within your holder/connector. Give them a good blast with contact cleaner and scrub them up.

(check for 12v first)

This. I did mine last week, i ended up bending the connector slightly as when the bulb was seated properly it wasnt completing the circuit.

 

[Renshaw]

This. I did mine last week, i ended up bending the connector slightly as when the bulb was seated properly it wasnt completing the circuit.

this.

 

[leewxm]

or buy a complete new 1 from ebay....£10