BG182 FF
Thought this might help everyone whos wondering and asking questions about this!
FIRST LOCATE THIS RUBBER GROMMET AND PULL IT OFF.
IMAG1026 by Reed Hopewell, on Flickr
NEXT USING A SCREWDRIVER, PULL THE CLIP BACKWARDS TOWARDS THE BACK OF THE CAR.
IMAG1027 by Reed Hopewell, on Flickr
THEN REMOVE EACH STRIP BY PULLING AND PUSHING SEVERAL TIMES WITH FORCE AND IT SHOULD POP OFF. FOR THE FRONT PULL TOWARDS THE REAR AND THE BACK STRIPS PULL TOWARDS THE FRONT.
IMAG1025 by Reed Hopewell, on Flickr
IMAG1030 by Reed Hopewell, on Flickr
TO REMOVE THE BULLETS, POP THE 3 CLIPS OFF BUT BE CAREFUL AS THEY BREAK EASILY.
IMAG1024 by Reed Hopewell, on Flickr
SPRAYING THE STRIPS
USING LIGHT COATS APPLY THE PRIMER, COLOUR AND CLEAR COAT. THIS IS WHAT IT SHOULD LOOK LIKE.
IMAG1029 by Reed Hopewell, on Flickr
IMAG1032 by Reed Hopewell, on Flickr
IMAG1034 by Reed Hopewell, on Flickr
IMAG1031 by Reed Hopewell, on Flickr
IMAG1037 by Reed Hopewell, on Flickr
SPRAYING THE DOOR HANDLE
MASK AROUND THE DOOR HANDLE AND REPEAT THE PREVIOUS STEPS.
IMAG1038 by Reed Hopewell, on Flickr
IMAG1040 by Reed Hopewell, on Flickr
IMAG1041 by Reed Hopewell, on Flickr
THE FINISHED PRODUCT
IMAG1045 by Reed Hopewell, on Flickr
FIRST LOCATE THIS RUBBER GROMMET AND PULL IT OFF.
IMAG1026 by Reed Hopewell, on Flickr
NEXT USING A SCREWDRIVER, PULL THE CLIP BACKWARDS TOWARDS THE BACK OF THE CAR.
IMAG1027 by Reed Hopewell, on Flickr
THEN REMOVE EACH STRIP BY PULLING AND PUSHING SEVERAL TIMES WITH FORCE AND IT SHOULD POP OFF. FOR THE FRONT PULL TOWARDS THE REAR AND THE BACK STRIPS PULL TOWARDS THE FRONT.
IMAG1025 by Reed Hopewell, on Flickr
IMAG1030 by Reed Hopewell, on Flickr
TO REMOVE THE BULLETS, POP THE 3 CLIPS OFF BUT BE CAREFUL AS THEY BREAK EASILY.
IMAG1024 by Reed Hopewell, on Flickr
SPRAYING THE STRIPS
USING LIGHT COATS APPLY THE PRIMER, COLOUR AND CLEAR COAT. THIS IS WHAT IT SHOULD LOOK LIKE.
IMAG1029 by Reed Hopewell, on Flickr
IMAG1032 by Reed Hopewell, on Flickr
IMAG1034 by Reed Hopewell, on Flickr
IMAG1031 by Reed Hopewell, on Flickr
IMAG1037 by Reed Hopewell, on Flickr
SPRAYING THE DOOR HANDLE
MASK AROUND THE DOOR HANDLE AND REPEAT THE PREVIOUS STEPS.
IMAG1038 by Reed Hopewell, on Flickr
IMAG1040 by Reed Hopewell, on Flickr
IMAG1041 by Reed Hopewell, on Flickr
THE FINISHED PRODUCT