Rolling Road Day @ RS Tuning

NATHAN182 · Jul 2, 2011

jenic said:
If you bring a RWD, I presume they are going to be done at the end of the day? Or can they be mixed in with the rest?

i was wondering this too as my mate is coming in his mr2

NATHAN182 · Jul 3, 2011

sorry can no longer make this...

1. Bonxy
2. daveski
3. Jacko
4. -KarL-
5. Fast_ad13
6. Rich_172
7.latza probably in a fettled saxo vts + 2 ( corsa vxr + sx200) if you lads dont mind
8. Jon.G + Mates Polo G40
9. Savi - In a Corsa C Turbo diesel
10. Chris205
11. Andyrg
12. Scunny_182

Gaz. · Jul 3, 2011

Low cars WILL need to be raised. Which is putting me off putting my name forwards!

Mike, they're 4WD rollers so it can't be too much hassle chopping and changing between the modes.

Sam · Jul 3, 2011

Gaz. said:
Low cars WILL need to be raised. Which is putting me off putting my name forwards!

Mike, they're 4WD rollers so it can't be too much hassle chopping and changing between the modes.

Thanks for this gaz. Was wondering how RWD would work. Also, do you know the minimum height a car needs to be at to go on the rollers ?

Thanks, Sam!

Chris205 · Jul 3, 2011

I had my ph1 on there and it was rather low, Paul had a little job on getting it on there but it went on. I'd say to safely get on without any hassle an 80mm drop would be ok

Sam · Jul 3, 2011

chris205 said:
I had my ph1 on there and it was rather low, Paul had a little job on getting it on there but it went on. I'd say to safely get on without any hassle an 80mm drop would be ok

Cheers Chris. Anything below 80MM is ridiculous imo.

Sam!

jenic · Jul 3, 2011

Cheers for that Gaz, should be able to slot everyone in anywhere then!

I didn't think lowness was that much of a problem, alignment however is a problem if its out.

Gaz. · Jul 3, 2011

-80mm? Depends on car length TBH. Shorter cars like a clio aren't so bad, the ZR scraped a bit last time getting on their rollers. I wouldn't even try and get my SX on though.

Johnpacey1 · Jul 4, 2011

1. Bonxy
2. daveski
3. Jacko
4. -KarL-
5. Fast_ad13
6. Rich_172
7.latza probably in a fettled saxo vts + 2 ( corsa vxr + sx200) if you lads dont mind
8. Jon.G + Mates Polo G40
9. Savi - In a Corsa C Turbo diesel
10. Chris205
11. Andyrg
12. Scunny_182
13. John

Johnpacey1 · Jul 4, 2011

Also, what time does this start.

Chris205 · Jul 4, 2011

I'd imagine about 10:00, last time we met to convoy from scotch corner around 8-8:30, waited around for Karl to get out of bed then got on our way

-KarL- · Jul 4, 2011

chris205 said:
I'd imagine about 10:00, last time we met to convoy from scotch corner around 8-8:30, waited around for Karl to get out of bed then got on our way

haha i think it was only you that waited :rasp:

Johnpacey1 · Jul 4, 2011

Sound. Ill meet you there at 10. Ill keep an eye on thread just incase anything changes.

Chris205 · Jul 4, 2011

-KarL- said:
haha i think it was only you that waited :rasp:

Becauase I'm a nice chap haha what time you fancy going?

-KarL- · Jul 6, 2011

There doesn’t seem to be that many going this time, so around the same time?

Gary172cup · Jul 6, 2011

Think i will tag along for the day out,may put bean number 2 on see what its doing as it feels alot quicker than my first one.

JamesWilson · Jul 7, 2011

1. Bonxy
2. daveski
3. Jacko
4. -KarL-
5. Fast_ad13
6. Rich_172
7.latza probably in a fettled saxo vts + 2 ( corsa vxr + sx200) if you lads dont mind
8. Jon.G + Mates Polo G40
9. Savi - In a Corsa C Turbo diesel
10. Chris205
11. Andyrg
12. Scunny_182
13. John
14.Kroozin(James)

Rich_172 · Jul 9, 2011

See everyone there at 10 then

latza · Jul 9, 2011

Can't make this due to work commitments. Also the saxo is rather low

Chris205 · Jul 9, 2011

-KarL- said:
There doesn’t seem to be that many going this time, so around the same time?

Yeah 8:30 sounds like a decent enough time.

Craig. · Jul 11, 2011

Mine went on fine last week aswell & its low! so everyone should be fine

Savi · Jul 11, 2011

Working that weekend

f0xy · Jul 11, 2011

Ummm........tempted to trailer the Mk1 up en-route to Donington, would be interested to see what the new engine makes. Il have a think.

JackoR26 · Jul 15, 2011

Looks like im out, dephaser pulley has gone so it sounds like a tractor!

Oh and when i pulled up on the drive the handbrake cable snapped, nice

Sam · Jul 15, 2011

f0xy said:
Ummm........tempted to trailer the Mk1 up en-route to Donington, would be interested to see what the new engine makes. Il have a think.

Should do it.

What you think it will be pushing ?

f0xy · Jul 15, 2011

Well it did 100odd miles to run it in initially, then and around 150-200 track miles at 6.5krpm+ over two track days with the limiter set to 7800rpm, runs nice. Old engine made 172bhp/165lbft @ TDF, this one feels the same if not stronger so id hope for about the same at RST...

Dave with the Inferno 182 made exactly the same power (to the .x) at RST and TDF weeks apart, so I'd say they are pretty much the same readings! My cars at around 830kg, thats where it counts really..

I only have a single set of wheels with full slicks on, so I'd need to find out if it was OK to run with those on...

Chris205 · Jul 17, 2011

What's the plans for meeting up etc next Saturday? Anyone fancy meeting at wetherby services As going straight down the a19 is easier for me

Jon.G · Jul 17, 2011

What time is the going to be on till? I've got to work Saturday now so I'll have to see what time I finish

Sam · Jul 17, 2011

Hi guys.

Its less than a week to go until the RR meet.

Im going to ring RS Tunning and confirm the amount of people that are going to be attending on wednesday lunch time.

It would be good if you would remove yourself from the list if you aint coming and dont just not show up. I think we will be hoping to arrive there at 10AM ish, so probably set off from somewhere in the NE at 9ish.

I know a some of you have made your own plans to travel there ?

What are your plans ? Share them with the group and we can all have a nice drive down together.

Me, Jacko and Cadab are meeting at Teesside Park McDonalds at 8.30AM. Have some breakfast and then make our way there. If anyone would like to meet us there they can.

Any questions, PM me.

Sam!

Bren Rogers · Jul 17, 2011

Fingers crossed I should be able to make this.

Hutchie · Jul 17, 2011

can i be a vaguely maybe, depends what the missus says when she gets back from crete.
if pauls bored he could tweak my map

cadab · Jul 17, 2011

Dear hutchie your not *that* much under the thumb are you?

Hutchie · Jul 17, 2011

i would rather be with her than with you c nuts :rasp:

Chris205 · Jul 17, 2011

I'll definitely be there

daveski · Jul 18, 2011

I wont be there, sorry guys.

1. Bonxy
2. Jacko
3. -KarL-
4. Fast_ad13
5. Rich_172
6. Jon.G + Mates Polo G40
7. Savi - In a Corsa C Turbo diesel
8. Chris205
9. Andyrg
10. Scunny_182
11. John
12.Kroozin(James)

Andyrg@ ClioTurbo · Jul 18, 2011

See you all there

-KarL- · Jul 18, 2011

I will try and make it on time

Hutchie · Jul 18, 2011

-KarL- said:
I will try and make it on time

bout 3pm in your books lol

Hutchie · Jul 18, 2011

-KarL- said:
I will try and make it on time

bout 3pm in your books lol

Rich_172 · Jul 18, 2011

Hutchie said:
can i be a vaguely maybe, depends what the missus says when she gets back from crete.
if pauls bored he could tweak my map

This. I will be coming up from Stoke and sounds like most people will be coming from the North so looks like I will be making my own way there

Rolling Road Day @ RS Tuning

North East

North East

North East

North East

Similar threads