Spacers

[RB182CUP-FF]

Hi im getting my mate to make me some spacers does any 1 know the PCD and centre whole measurements for the 182?
cheers lee

 

[James28]

4 x 100 60.1 . Might want to wait for someone else to confirm centre bore though.

 

[Blacky950]

Yeah james28 is right 60.1mm for the centre.

 

[PP200t]

What size you going for bud?

 

[RB182CUP-FF]

going to try 5mm and 10mm

 

[RB182CUP-FF]

4 x 100 60.1 . Might want to wait for someone else to confirm centre bore though.

cheers mate

 

[James28]

Ideally want Hubcentric mate. 5mm you'll be alright, but 10mm you'll need longer bolts, and you won't be able to get hubcentric.
(hubcentric spacers have a lip for the wheel to sit on, so all the wait is not simply on the bolts)

 

[DannyR]

You will need longer wheel bolts whatever size you go up be it 3 or 10

 

[RB182CUP-FF]

Ideally want Hubcentric mate. 5mm you'll be alright, but 10mm you'll need longer bolts, and you won't be able to get hubcentric.
(hubcentric spacers have a lip for the wheel to sit on, so all the wait is not simply on the bolts)

I know ill need longer bolts. im going to give them a go as they wont cost me anything any way. but thanks for your input.

lee

 

[RB182CUP-FF]

just another question does any know the overall size of the spacers to save me taking the wheel off?
cheers lee

 

[PP200t]

Iirc you only need longer bolts if you go over 6mm due to the bolt not having enough purchase in the hub..

 

[RB182CUP-FF]

cheers just need to know the overall diameter of the spacers and my mate can make them then. if any 1 knows that would be great.

cheers lee