Spigot Rings for aftermarket OZ F1's

[Skeeter]

Picked up some after market F1's, but can't find any spigot rings for them. The bore is 73.1, yet the plastic spigots I have don't fit. They are too tall as the bore of the F1's tapers in after about 10mm. Looking at the ones that came on the wheels they need some metal ones with a metal sprung band around them a few mm's in to hold them in.

Anyone know where I can get OZ rings (the ones on them now are OZ branded)?

 

[Gaz.]

I used plastic ones fine in my F1s.

 

[Skeeter]

I used plastic ones fine in my F1s.

Got any pics/details of them? the plastic ones I have don't fit.

 

[Skeeter]

Got some metal ones apparently for OZ wheels, at 75mm, and there are too big, and too deep.

This is becoming a nightmare!

 

[AdamR]

The bore is 73.1, yet the plastic spigots I have don't fit. They are too tall as the bore of the F1's tapers in after about 10mm.

If you want me to pop them in a lathe and reduce the height a bit, just let me know

I had to make some from scratch when I fitted SuperTs to my car - well, I didn't have to, but I think OZ wanted about £75 a set for alloy ones, pffff!