Stalk Display Adaptors Faq

[Tom]

If People want to post in here what adaptors they have used:

(Please dont discuss this just post in the same format as i have)

Then i can build a proper faq to go in the ice section.

Alpine for Clios 1998 onwards

Part Numbers (both parts required)

KCE-840B Interface- (Renault, Peugeot, Landrover, Ford). Basic Alpine Harness Connector

KWE-845E Renault Clio 98 and new Renault 98 facelift Models. 15 Pin NEW flat Molex-Connector

Functions: Stalk control only.

Dash removal needed? Yes

 

[Tom]

Pioneer

Part Numbers

Clio mrt-91 dec-92 With Steering Wheel Controls PIO-801+PIO-201

Clio dec-92 jan-01 Without Remote Display PIO-801

Clio jan-01 > Without Remote Display PIO-801+PIO-205

Clio jun-98 jan-02 With Remote Display PIO-812

 

[Tom]

SONY

Part Numbers






Renault


Clio (separate display up to 2000)


22DC461/62P


Philips


DRNS001


Connects to Sony

 

[Tom]

Kenwood

Part Numbers

PC9-701 remote control interface cable Renault Clio Mk. 4 (Nov 2000 onwards)

PC9-701 & PC9-205 remote interface cable Renault Clio Mk. 1, 2 and 3 (up to Nov 2000)


PC9-712 remote control interface cable Renault Clio Mk.3 (Apr 1998 to Nov 2000)


Functions: Stalk control only.

Dash removal needed? Yes

 

[Tom]

How can I retain my display and stalk controls?

Sony

Autoleads: http://www.autoleads.co.uk/www.autoleads.co.uk do adapters for the stalk but none for the display, currently trying to get one for stalk and display that works, ripspeed sell them for £30 but you have to remove your dash to fit it.

Connects2: http://www.connects2.co.uk/www.connects2.co.uk do adapters for the stalk and display, the only lead that works with the display, ripspeed sell them for £60. Normaly have to be ordered in, also the easiest to fit. No removing dash, it simply uses the Remote Port, Power & CD Changer Controls.

Audiolinx: http://www.audiolinx.co.uk/www.audiolinx.co.uk do adapters for the stalk and display, ive never heard anything about them but http://www.incardiscount.co.uk/http://www.incardiscount.co.uk stock them for £60.
[/QUOTE]

Kenwood

Justkenwood: http://www.justkenwood.co.uk/www.justkenwood.co.uk stock the adapter for the stalk control only, very much alike the autoleads one for fitment and controls.
[/QUOTE]

Alpine

MCS Direct: http://www.mcs-direct.co.uk/www.mcs-direct.co.uk stock the adapter for the stalk control only, Its under Alpine|Accessories, in 2 parts. You need the control unit and a interface, cheaper then ordering it from Halfords. Again fitment is like the Kenwood and Autoleads Sony adapters. Shame alpine only offer stalk control only.
[/QUOTE]

Blaupunkt

Blue Spot: http://www.bluespot.co.uk/www.bluespot.co.uk stock the adapter for the stalk control only, no display. £44 and fits like the Alpine, Kenwood & Sony Autoleads ones.
[/QUOTE]

 

[Tom]

http://www.bluespot.co.uk/install/renault.asphttp://www.bluespot.co.uk/install/renault.asp

 

[Mike@Rentech]

I have fitted the genuine reno adapter for my cdx mp70 system, works great, I can get them but they aint cheap mine was 80 sheets , they normally cost 100.

It does the display and sat control.

 

[jon_r]

btt. can we sticky this?

 

[rockport]

i didnt think you could get an adaptor for the pioneer HUs to use the valver OEM remote... If u can, ive never seen one?!?!?!?

 

[northy]

Ive got a AutoLeads PC901 (Sony Compatable) just plugs into the steering wheel lead, taps into the power supply & connects into the headunit.

I believe that on the Williams 3s that the steering wheel controls were originally designed by Blaupunkt. So in theory any Blaupunkt headunit should be directly compatable with the steeringwheel controls. (in my case anyway, yet to prove)

 

[R3OBC]

northy, sounds like the one i have just got that dont work. Silver box, connects into power, and cd-multi changer out, with a black jack plug??? mine aint working!!! elp lol

 

[northy]

You got it sorted yet ?

 

[R3OBC]

no mate, im having another lead sent. think its part number PC9-501. see what happens with the new lead

 

[R3OBC]

new pc9-501 came today. connected into +12v, into autochanger output and data, and wahey, i have display n stalk controls!!! doesnt scroll my minidisc name tho.............bugger! never mind, still tells me what radio station im on, and ya can even adjust the tone balance and fader on the stalk!! £20 bargain!!! do a search for pc9-501, and £20 is a bargain!!

Rob (dyin in bed wi the flu.............still got up to fit the adapter tho lol)