Trouble Fitting Simota!

[Bodge!]

Hello,

Tried to fit my induction kit today, but was foiled

managed to get the first half of the airbox off, but struggled with the second half.........

theres a couple of bolts that i cant work how to remove em!

there like Torx screws, only not screws, sort of like a Torx Socket............

someone mentioned star driver, but im not 100%!

 

[Tucker]

they are torx bolts, just use the correct torx bits on the end of a rachet screwdriver

t25 or something very close to that

 

[Bodge!]

Righto boss cheers.

there raised, so i was a bit confused!

i know the two holding the box on, are Torx.

i would post a foto but i dont have one

 

[bing_17]

Yeah that are torx mate but you need a socket type of torx (female) unlike the male type you would normally use.

 

[Bodge!]

cheers very much!

might get the beast fitted 2moro then!!

 

[A18XHO]

you have to take off the throttle body and plenum to remove the main big box

 

[ginna]

external torx, halfords will have some

 

[cobra248]

just fitted my simota 2 days ago, i had to take out the coolent tank to get the old airbox of, me n my mate done it in about 15 minuites.
also removing it from the throttle vody was quiet a hard job need to wiggle it out loads