tryin to get to head gaskets help

[clio-mad228]

ive removed the inlet manifold an that how you remove the next bit to get too the head gasket thx
it a 1.2 16v by the way thx

 

[TomTom]

Can you see the cam? If so its just the E sockets you need to take out now, E12 or E14 size IIRC. Theres 10 of them 5 at the front 5 at the back either side of the cam.

 

[ditz]

the next bit to get to the head gasket,, you mean the head?
if you have to ask dont tackle doing a headgasket there is too much involved

unless you are talking about the cam cover
in which case its self explanitory and is easier than removing the inlet.. just un bolt it