Rear disk 'wobble'

[fa57 son]

Guys,

Just put new disks on but they wobble like the bearing has gone excessively.

Could this be because the washer is missing i cant remember seeing one when i took it off and have checked the old disks?

Also are all rear hubs on the 1*2s the same?

Regards

 

[George@RTR_Parts]

More than likely mate

Picture of what the rear disc washers/spacers look like in this thread:

http://www.cliosport.net/forum/show...ugh-rear-wheel-bearings-Help-much-appreciated

 

[mossyv6]

Have you tightened the hub nut up sufficiently? the discs still move until the hub nut is tightened down.

 

[fa57 son]

Was tightened TIGHTTT but will be getting torque gauge out to double check

 

[mossyv6]

Even without a torque wrench it shouldn't move - I would also suspect the back spacer is missing.

 

[Ryanph1rs]

You've lost the spacer ... Don't keep driving it you'll end up ripping the stub axle off and causing a horrid accident... Get onto renault or make a new spacer

 

[fa57 son]

Washers Fixed it thanks for your help people

 

[Darren S]

Those little washers are a right PITA! Have you made sure they are the right way round too? The bearing will fail prematurely if they are wrong.

D.

 

[fa57 son]

I put the flat side against disc?

 

[DannyR]

I put the flat side against disc?

Correct

 

[George@RTR_Parts]

Washers Fixed it thanks for your help people

Good to hear mate, glad you got sorted