ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Adey.'s latest activity
-
Lumpy idle fwend!!! -
Adey. replied to the thread Rusty old 1968 Renault R8.This morning I gave the head a retorque and reset the tappets to pipers values 0.25 inlet and 0.30 exhaust (bit big?). Adjusted the base...
-
It's ace!!
-
Adey. replied to the thread Rusty old 1968 Renault R8.your standards must be very low...... thanks though :D
-
Absolutely fantastic! It's one of my favourite cars on here! :love:
-
Adey. replied to the thread Rusty old 1968 Renault R8.And we are in and running! Fuel from a jerry can but I wanted to get it fired up and revved to get the cam bed in and allow it too cool...
-
Cant see the throttle body when its doing its 4500rpm revving as I cant replicate it, I've tried to dummy an emissions test on the drive...
-
Adey. replied to the thread 1.2 16v fault - I'm stumped!.I had a valver engine in a 5gtt once, ran a little lumpy with higher revs at idle, once hot it would revs its tits off, had a crack in...
-
Can only be a few things really. It's getting more air or more fuel. I'm thinking it's still some sort of throttle issue.
-
Adey. replied to the thread 1.2 16v fault - I'm stumped!.Smoke check for air leaks in the pvc or manifold. Can you see what the throttle is doing when its revving high? checked the throttle...
-
Nothing too much exciting today. I need a few more bits to build the engine and just haven’t pulled my finger out to order them so had a...
-
Adey. replied to the thread Rusty old 1968 Renault R8.Super quick service from the guys/girls at piper. Turned up this afternoon so spent some time this evening getting it bob on. Ive left...
-
-
Updates. Cleaned and a coat of c2v3 and a run out. Still mocking up parts for the g25 setup. Tried the trophys tial mvs wastegate on...
-
Adey. replied to the thread Rusty old 1968 Renault R8.And I have found my new favourite job on an 8..... fuel tank removal. Im sure the Haynes manual told me I need to drop the axle and...
-
-
Adey. replied to the thread Rusty old 1968 Renault R8.After some chatting to sparkie ref N/A tuning the 1397 I contacted piper cams and asked for a custom grind camshaft. A little back and...
-
