What's new
By:
Filters
ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Brigsy's latest activity

  • Brigsy
    Brigsy replied to the thread Brake Pedal Switch Wiring.
    All on visu see attached pdf. 160 is the brake light switch. 1016 is passenger side fuse box. 120 is injection ecu. 172 & 173 are rear...
  • Brigsy
    Brigsy reacted to Adey.'s post in the thread Oops I did it again... Adey's Clio 200 EDC with Like Like.
    Finally found a front lower panel with both inspection hatches in. Lots of the RS' are missing them, though they are held in pretty...
  • Brigsy
    Brigsy reacted to ex-Chinese Dave's post in the thread My cheap(ish) 172 Cup with Like Like.
    Anyway, all of that was a nightmare. I don’t recommend anybody even attempting this unless they have some kind of spray booth where the...
  • Brigsy
    Brigsy reacted to ex-Chinese Dave's post in the thread My cheap(ish) 172 Cup with Like Like.
    Plenty to be getting on with again today. First up was to give the bumper a quick spray with some 2K clear coat. I did the repair and it...
  • Brigsy
    Brigsy reacted to agriff's post in the thread What have you done to your car today ??? with Like Like.
    Whilst clearing stuff from my parents I found a toy box from when I was four years old, I even liked Clio's then....!
  • Brigsy
    Brigsy reacted to f0xy's post in the thread E36 3.0 ITB Race Build with Like Like.
    After 9 days in the car, totally bored of the gearing on these cars being so unlively. The 981 and forward are no better in stock form...
  • Brigsy
    Brigsy replied to the thread Help, parts needed.
    I might have a refurbed set in the garage if you want to buy a set.
  • Brigsy
    Brigsy reacted to Paulios's post in the thread Help, parts needed with Like Like.
    Those look familiar, I'll give the offending article a good coat of looking at tomorrow
  • Brigsy
    Brigsy replied to the thread Help, parts needed.
    These type? Drill out the remains of the bolt and put a nutsert in.
    • 20220809_231547.jpg
    • 20220809_125637.jpg
  • Brigsy
    Brigsy replied to the thread The new tool thread.
    Rag and brake cleaner works mega.
  • Brigsy
    Brigsy reacted to Louis's post in the thread The PMS shifter rattle with Haha Haha.
    Get as much red thick grease in it as humanely possible. I looked like I'd wanked off a very unwell shrek by the end.
  • Brigsy
    Brigsy replied to the thread The PMS shifter rattle.
    Im going to try refitting the rubber boot and grease. Mine only rattles a bit at motorway speed/cruising so not bad overall but if it...
  • Brigsy
    Brigsy reacted to Louis's post in the thread The PMS shifter rattle with Like Like.
    Remove the outer reverse sleeve, slide and bring down the shaft to the very bottom. Apply silicone to the base of the shifter before...
  • Brigsy
    Brigsy replied to the thread T. Turbo is back.
    Thanks mate. Should be 100% on for it, i dont think ill have it in for mapping before but it can go as is. Be good to catch up its...
  • Brigsy
    Brigsy reacted to NickReilly063's post in the thread T. Turbo is back with Love Love.
    Looking Great Jon - I see your name is on the list for 9th August, so looking forward to seeing it again. I’m sure it will be the star...
Show older items
Top