ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Brigsy's latest activity

  • Brigsy
    Brigsy reacted to BREMBO's post in the thread Red Ph1 1.4 Si with Like Like.
    Little Clio has been grand MOT in August it was at 23,700 as of today its at around 27,500. Hasn't been any issues. Until today. Went...
  • Brigsy
    Brigsy reacted to MAXRUNDOWN's post in the thread Ph1 revival with Like Like.
    Cylinders are numbered from the flywheel end.. which is the low cylinder? There are some concerning marks on 1 and 4 What did the...
  • Brigsy
    Brigsy replied to the thread Ph1 revival.
    Looks like the corrosion on the top of cyl 1 is pretty bad. Prob be rebore and up a size in pistons or liners in the block to return to...
  • Brigsy
    Brigsy reacted to Klumpy Dumpy's post in the thread Ph1 revival with Like Like.
    Put some 197 pistons in whilst you're in there You'd be daft not to. The rings are the same for all F4R iirc
  • Brigsy
    Brigsy reacted to Adey.'s post in the thread Rusty old 1968 Renault R8 with Like Like.
    Decided to take the 8 out for a run to a car show this weekend. Its been sat for a few weeks whilst away but started straight up and...
  • Brigsy
    Ecu powers up so thats good. If the fan is starting up with ign on, it might be wired incorrectly or differentlyto last time, poss...
  • Brigsy
    Immob light irrelevant now as standalone ecu has control over the engine. Forget all the common fixes for original ecu. Does the ecu...
  • Brigsy
    Brigsy replied to the thread Ratchet spanner recommendation.
    Yep knuckle breakers the flexi head when loose. I need a set of angled ones, and reversible on the lever like a ratchet. I need to...
  • Brigsy
    Brigsy reacted to thecrim22's post in the thread Ratchet spanner recommendation with Like Like.
    Yeah im not after flexi heads, used them in the past and usually end up twatting knuckles off of something, or they get loose and when...
  • Brigsy
    Brigsy replied to the thread Ratchet spanner recommendation.
    The halfords advanced flexi head ratchet spanners are decent for the money but the flexi head pivot wears out fast with regular use...
  • Brigsy
    Brigsy replied to the thread Daily dci.
    Updates Blue dci has been laid up since beginning of March due to the leaking heater matrix. I was seriously lacking motivation to do...
    • 20260412_131428.jpg
    • 20260412_123045.jpg
    • 20260412_122737.jpg
    • 20260411_160010.jpg
    • 20260411_150221.jpg
    • 20260410_142341.jpg
    • 20260410_152920.jpg
  • Brigsy
    SRF for me, easy get a year to 18 months out of it.
  • Brigsy
    Brigsy reacted to Klumpy Dumpy's post in the thread Emissions MOT fail with Like Like.
    No because most proper people that map out dpfs etc are removing the entire logic blocks from the ECU by telling it that it never had...
  • Brigsy
    Brigsy reacted to Martin_172's post in the thread Martin's 1.2 16v Extreme 4 with Love Love.
    @aldo_87 dropped off a set of fairly decent condition eibach sport lines he found in his garage, so swapped them on, took 20 mins to do...
  • Brigsy
    Brigsy replied to the thread Titanium MrBlonde.
    I got a new one from renault a few years back, might still be available.
Top