ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

JamesBryan's latest activity

  • JamesBryan
    JamesBryan replied to the thread Tyre Size Help.
    Yeah in by 7mm. Sidewall will look ~10mm chunkier.
  • JamesBryan
    JamesBryan replied to the thread Tyre Size Help.
    Should be almost identical diameter and offset wise, running 215/45/17 New setup will sit in the arch a little bit more.
    • Screenshot 2026-07-27 105029.webp
  • JamesBryan
    JamesBryan replied to the thread Tyre Size Help.
    What size are the current 18" tyres?
  • JamesBryan
    JamesBryan reacted to Struggler's post in the thread Oil Cooler Priming with Like Like.
    sounds good! thanks! Thankfully for me I have fuel on its own switch so cranking with no start is easy.
  • JamesBryan
    JamesBryan replied to the thread Oil Cooler Priming.
    Thermostatic ones are never fully closed, they have a slight bypass otherwise you'd have a dump of cold oil going in when the stat opens...
  • JamesBryan
    JamesBryan reacted to mumpy's post in the thread Power Tool Perverts with Like Like.
    Yeah I have two batteries and a charger included from when I originally bought M18FMTIW2F12-502X :)
  • JamesBryan
    JamesBryan replied to the thread Power Tool Perverts.
    Assume you have batteries and charger already as that's a bare tool?
  • JamesBryan
    JamesBryan reacted to Brigsy's post in the thread Coolantgate with Like Like.
    I always bleed stat housing from cold/before running. You will hear the matrix fill / coolant rush in on first start. Never ran it at...
  • JamesBryan
    JamesBryan reacted to Tin.tin's post in the thread Coolantgate with Like Like.
    Thank God for you mate i was probably gunna do just that 😂 thanks again
  • JamesBryan
    JamesBryan replied to the thread Coolantgate.
    No, do it before you run the engine. Workshop manual specifically says not to remove the bleed screw with the engine running.
    • Screenshot_20260717-181806.webp
  • JamesBryan
    JamesBryan reacted to Brigsy's post in the thread Coolantgate with Like Like.
    Same on most renaults being honest, full flow to matrix. I think the bypass valves for matrix are more of a bmw/vw thing.
  • JamesBryan
    JamesBryan replied to the thread Coolantgate.
    I think coolant is constantly flowing through them mate, so having heaters on full is not really needed (although good to know it's...
  • JamesBryan
    JamesBryan replied to the thread Coolantgate.
    Just the one bleed screw on mk2, on the thermostat housing. Fill coolant bottle until a steady stream comes out. Then run the car until...
  • JamesBryan
    Looks like a mix of gear oil and type d coolant.
  • JamesBryan
    A great weekend, thank you so much to admin for all of your efforts putting the weekend on, it’s hugely appreciated. A great photo of...
Back
Top